Author Topic: Arrow Rest  (Read 5556 times)

0 Members and 1 Guest are viewing this topic.

Offline RyanR

  • Member
  • Posts: 833
Arrow Rest
« on: February 24, 2014, 08:36:23 pm »
I am curious how the rest of you make your arrow rests and what type of material you use. I am looking for new ideas.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Arrow Rest
« Reply #1 on: February 24, 2014, 09:09:58 pm »
My parents chipped in and made my arrow rest...its the knuckle of my left hand!

I have added built up arrow rests on a few bows, but I have never had the courage to carve a rest into a bow grip.  But then, I tend to make very narrow handles, too. 
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Arrow Rest
« Reply #2 on: February 24, 2014, 09:19:18 pm »
Mines made from whatever the bows made from lol just cut it in with a rat tail file Idk if there's a difference between a shelf And rest soo ...
I like osage

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Arrow Rest
« Reply #3 on: February 24, 2014, 09:20:35 pm »
Built up scraps of leather superglued in place covered with leather handle wrap.   

Offline adb

  • Member
  • Posts: 5,339
Re: Arrow Rest
« Reply #4 on: February 24, 2014, 09:26:52 pm »
Cork

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Arrow Rest
« Reply #5 on: February 24, 2014, 09:35:19 pm »
Cut a golf tee in half
Clatskanie, Oregon

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Arrow Rest
« Reply #6 on: February 24, 2014, 09:45:07 pm »
 Plan for it when you shape the handle, just leave enough material for it. Piece of antler or bone looks good if the handle is already done. Could also just use a braided piece of cordage at the top of the grip. On cord wrapped handles , I reverse twist in an extra piece for the top couple of wraps to beef it up where the arrow will sit.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Arrow Rest
« Reply #7 on: February 24, 2014, 09:48:59 pm »
I use built up leather scraps or a leather floppy rest depending on the bow and handle shape.
I started out with nothin' and I still got most of it left

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Arrow Rest
« Reply #8 on: February 24, 2014, 10:12:02 pm »
Ryan, haven't tried it yet but am thinking of embedding a portion of deer dew claw for both shelf and pass.
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline PrimitiveTim

  • Member
  • Posts: 1,166
Re: Arrow Rest
« Reply #9 on: February 24, 2014, 10:32:46 pm »
My parents chipped in and made my arrow rest...its the knuckle of my left hand!
Amen to that!
Florida to Kwajalein to Turkey and back in Florida again.  Good to be home but man was that an adventure!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Arrow Rest
« Reply #10 on: February 24, 2014, 10:43:50 pm »
I'm with Clint but I'll say floppy rest on most bows and built up leather on the others. I really prefer bare knuckle like JW but my skin has gotten so thin in he last few years I can't afford the blood loss.  ;D  The floppy rest that Mickey Lotz came up with solved the problem. I get the same feeling as off the knuckle but now I get to keep the knuckle.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Arrow Rest
« Reply #11 on: February 24, 2014, 11:29:51 pm »
I have used all of the methods talked about above.  And I like the built up leather for stiff handled bows, and the golf tee or small off cut of arrow shaft shaped like a golf tee for bendy handle bows.  The floppy rest I mostly use with a temp handle wrap for shooting in the bows.  I have not made enough bows to have much of a preference on feel just looks :)

Offline tallpine

  • Member
  • Posts: 183
  • East Texas
Re: Arrow Rest
« Reply #12 on: February 24, 2014, 11:55:55 pm »
I also like the floppy rest, to me it just looks right on a primitive bow

Offline Poggins

  • Member
  • Posts: 467
Re: Arrow Rest
« Reply #13 on: February 25, 2014, 12:45:51 am »
I've used built up leather and floppy rests but I'm also a knuckle drager ( just a smart remark I made when someone asked me where my arrow rest was).

Offline bubby

  • Member
  • Posts: 11,054
Re: Arrow Rest
« Reply #14 on: February 25, 2014, 02:33:21 am »
Cork
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹