« previous next »
Pages: 1 [2]

Author Topic: Choosing Quartersawn Lumber...  (Read 7098 times)

0 Members and 1 Guest are viewing this topic.

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Choosing Quartersawn Lumber...
« Reply #15 on: February 20, 2014, 06:57:27 pm »
Quote from: Don C on February 20, 2014, 06:27:18 pm
<snip>
Oh, Sorry for the hijack Onebow, my bad

Not at all!  It's all discussion which is what I wanted to see.  :D ;D ;D :)

I am still curious about one thing that has not been discussed - Is there any particular opinions/reasons to contemplate when selecting wood grain for the belly of a LAM bow?  Does grain orientation effect 'crush resistance' or compression strength?

OneBow

 
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Choosing Quartersawn Lumber...
« Reply #16 on: February 20, 2014, 07:09:14 pm »
LOL, Don, that might work. I don't know for sure as I have never done it. When I have a violated ring I just chase another. Jawge
« Last Edit: February 20, 2014, 07:13:31 pm by George Tsoukalas »
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Choosing Quartersawn Lumber...
« Reply #17 on: February 20, 2014, 07:16:49 pm »
OneBow, I have no experience with wood backed bows but my sense is 1/4 sawn by a bit but it probably does not matter all that much.
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Ross.m.

  • Member
  • Posts: 70
Re: Choosing Quartersawn Lumber...
« Reply #18 on: February 21, 2014, 08:42:08 am »
Would quartersawing be good with a rather large hickory?
Logged
Pages: 1 [2]
« previous next »