« previous next »
Pages: [1] 2

Author Topic: What ya think  (Read 4461 times)

0 Members and 1 Guest are viewing this topic.

Offline Joec123able

  • Member
  • Posts: 1,769
What ya think
« on: February 18, 2014, 05:14:04 pm »
Got this weird lookin stave and can't make up my mind on what to do with it. Should I go bendy handle ? And what should I do with that weird reflexed spot





Very clean back
Logged
I like osage

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: What ya think
« Reply #1 on: February 18, 2014, 05:20:35 pm »
That looks like something that Blackhawk or Matt Wirwiki would tackle.  Maybe they will chime in with some suggestions.
Logged
Greg Sulfridge, Lafollette, TN

Offline paulsemp

  • Member
  • Posts: 1,918
Re: What ya think
« Reply #2 on: February 18, 2014, 05:34:13 pm »
yeah I would ask blackhawk. I'm sure he will tell you to make a bow with a setback handle considering it's his favorite design.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What ya think
« Reply #3 on: February 18, 2014, 05:36:35 pm »
I'd take it down to floor tiller size and use heat to even it up. It will take a few sessions for a bend like that but it can be done.
...or you could just g ahead and tiller it out as it is.  ::)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: What ya think
« Reply #4 on: February 18, 2014, 05:37:12 pm »
 What's the length?
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Joec123able

  • Member
  • Posts: 1,769
Re: What ya think
« Reply #5 on: February 18, 2014, 05:39:26 pm »
About 60 inches long
Logged
I like osage

Offline Joec123able

  • Member
  • Posts: 1,769
Re: What ya think
« Reply #6 on: February 18, 2014, 05:41:34 pm »
Quote from: Pat B on February 18, 2014, 05:36:35 pm
I'd take it down to floor tiller size and use heat to even it up. It will take a few sessions for a bend like that but it can be done.
...or you could just g ahead and tiller it out as it is.  ::)

The spot is right where about mid limb wil be I'm wondering if bending to be even could damage the wood at all On the compression side ?
Logged
I like osage

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: What ya think
« Reply #7 on: February 18, 2014, 05:47:26 pm »
The heat actually strengthens the wood a bit like tempering it. I've straightened some pretty crooked osage and never had a problem with the wood because of it. Take it slow and only work a little at a time. Let it cool completely before starting the next session. Don't force it too much at a time.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Badger

  • Member
  • Posts: 8,124
Re: What ya think
« Reply #8 on: February 18, 2014, 05:49:41 pm »
   Rough out the bow then put it on a cawl with some heat and clamps then iron it out like a shirt. Then pray!
Logged

Offline Joec123able

  • Member
  • Posts: 1,769
Re: What ya think
« Reply #9 on: February 18, 2014, 05:55:25 pm »
Quote from: Badger on February 18, 2014, 05:49:41 pm
   Rough out the bow then put it on a cawl with some heat and clamps then iron it out like a shirt. Then pray!

Lol Will do
Logged
I like osage

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: What ya think
« Reply #10 on: February 18, 2014, 06:19:04 pm »
Hell id leave the dog leg. Yeah a bit of a tricky tiller, but super BA.
Logged
Clatskanie, Oregon

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: What ya think
« Reply #11 on: February 18, 2014, 07:43:28 pm »
I'm with Bryce. I'd just make the bow. Test my skills. Test my tillering/timing knowledge. Test my eye. Challenge and reward baby.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Joec123able

  • Member
  • Posts: 1,769
Re: What ya think
« Reply #12 on: February 18, 2014, 07:58:39 pm »
Okay I guess I will just rough it out an see if I want to just leave it or not I have plenty of wood for a stiff  handle but I may go bendy handle anyways
Logged
I like osage

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: What ya think
« Reply #13 on: February 18, 2014, 08:17:16 pm »
I'd cut it off at the kink and join it with another good half.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: What ya think
« Reply #14 on: February 18, 2014, 11:17:51 pm »
I like me an occasional wonky stave but, ....dang man. It is osage though so who know what shape you might be able to form it into once thinned down a bunch. I do wanna see what you do with it Joe, ought to be interesting.
Logged
I ain't broke but I'm badly bent.
Pages: [1] 2
« previous next »