Author Topic: Blades of jasper  (Read 1410 times)

0 Members and 2 Guests are viewing this topic.

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Blades of jasper
« on: February 15, 2014, 10:59:40 am »
I was given two chunks of PA jasper this summer to cut and slab and knap for a guy. I can keep half of the slabs. This what I came up with for his half.  This shows the value of slicing up a piece of good, rare rock. All these average about 4 inches long. Those are quarters in the picture.




Ahnlaashock

  • Guest
Re: Blades of jasper
« Reply #1 on: February 15, 2014, 11:19:19 am »
Lots of practice for you I see! 
I wish my slab saw was repaired!  The usable return on the local stone would be at least three times as high.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Blades of jasper
« Reply #2 on: February 15, 2014, 12:25:43 pm »
Steve, the Pa. jasper looks like some high quality stuff, Bob

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Blades of jasper
« Reply #3 on: February 15, 2014, 12:35:31 pm »
The ones with the yellow and red in them were very tough on the yellow. It has all been heated to 500 degrees. And the lighter stuff was still tough. these were two rocks that were not really that large to start with. But cutting them on a bias angle allowed a bit wider  slabs and   remember this is only HALF of them.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Blades of jasper
« Reply #4 on: February 15, 2014, 03:44:13 pm »
Those are really looking good Steve.

Offline Majuba Tom

  • Member
  • Posts: 275
Re: Blades of jasper
« Reply #5 on: February 15, 2014, 07:04:03 pm »
They look great. I really like Jasper.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Blades of jasper
« Reply #6 on: February 15, 2014, 10:37:45 pm »
NICE!!
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Tower

  • Member
  • Posts: 2,298
Re: Blades of jasper
« Reply #7 on: February 16, 2014, 11:19:43 am »
Those are nice & good lookin stone to boot!
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Blades of jasper
« Reply #8 on: February 16, 2014, 08:56:34 pm »
That looks like some of the same stuff Zuma gave me this weekend. It chipped real nice.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Blades of jasper
« Reply #9 on: February 16, 2014, 10:11:42 pm »
His was probably the Flint Run jasper from VA. It is nearly the same stuff.