Author Topic: Knotty Osage  (Read 2914 times)

0 Members and 1 Guest are viewing this topic.

Offline Hrothgar

  • Member
  • Posts: 1,477
Knotty Osage
« on: February 12, 2014, 02:52:28 pm »
This is my current project. A year old osage stave, straight but knotted like a piece of ERC. Luckily the knots are all pretty much in the center of the limbs.So far 1 7/8" wide tapering at mid limb; 65" long.
" To be, or not to be"...decisions, decisions, decisions.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Knotty Osage
« Reply #1 on: February 12, 2014, 02:55:29 pm »
That ought to make a nice bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Knotty Osage
« Reply #2 on: February 12, 2014, 02:59:32 pm »
I'll be watchin'.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Knotty Osage
« Reply #3 on: February 12, 2014, 03:15:54 pm »
knot nock.....

whos there?


Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Knotty Osage
« Reply #4 on: February 12, 2014, 04:04:20 pm »
knot nock.....

whos there?

Now that was a naughty joke!  ::) :o 8) >:D :laugh:

OneBow


 

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Knotty Osage
« Reply #5 on: February 12, 2014, 04:15:09 pm »
Lots of character there.  Good luck with it.  What are your plans with the knot on the end of the limb?
I started out with nothin' and I still got most of it left

Offline ohma2

  • Member
  • Posts: 960
Re: Knotty Osage
« Reply #6 on: February 12, 2014, 05:39:37 pm »
I seen a tip like that some time back the guy had drilled out the knot he ran a long string loop through the belly side brought the loop over the tip to the belly side again.the bow was very dark osage and apeared to have been around awhile.

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Knotty Osage
« Reply #7 on: February 12, 2014, 07:28:06 pm »
Osage Outlaw -- I'm 'knot' sure what I'll do with the knot on the end  ;D. I remember seeing the bow omha2 is talking about. That's still an option, although I was planning on cutting off the tip just below the knot, that would allow for a 64" bow.

The other quandary is the knot mid-limb, I'm thinking I'll probably drill it out. I did that on a hickory pyramid bow--drilled a hole all the way through and left it. The difference here though is that the knot doesn't go through to the back, so I guess it would get drilled about halfway through. Any thoughts...?

Pat B. So far this stave has been a lot of fun, the handle pretty much designed itself, the way it split.
" To be, or not to be"...decisions, decisions, decisions.

Offline Josh B

  • Member
  • Posts: 3,741
Re: Knotty Osage
« Reply #8 on: February 12, 2014, 07:41:39 pm »
That looks like it oughta be fun!  Josh

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Knotty Osage
« Reply #9 on: February 13, 2014, 07:00:22 am »
Good looking stave,I wouldn't drill it,I would pick out the dead/rotten stuff and leave it be. The grain will grow down into the knot so no violations by picking it out. Good luck,should make a nice bow. Sure looks older than a year,love that dark colored Osage. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Knotty Osage
« Reply #10 on: February 13, 2014, 07:33:39 am »
 Hrothgar,
                That handle is going to be absolutely beautiful with all those knots and grain...Can't wait to see it! Are you planning on wrapping the handle or leaving the natural beauty naked?
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Knotty Osage
« Reply #11 on: February 13, 2014, 08:27:54 am »
Pappy - thanks for the advice, that's what I'll do.

Donald -in fairness to the wood I guess I'll leave her a 'naked' beauty.
" To be, or not to be"...decisions, decisions, decisions.

Offline WhitefeatherFout

  • Member
  • Posts: 89
Re: Knotty Osage
« Reply #12 on: February 13, 2014, 09:52:38 am »
Certainly has potential to be a dandy looking bow.  I'd just pick out the dead wood in the knots as Pappy said.  I typically soak the inner area of the knot it thin superglue after cleaning it out. May not be needed but I do it just in case for extra insurance as the knot wood usually dries at a different rate and often times has small, almost invisible checks.  Best of luck.