« previous next »
Pages: 1 2 [3]

Author Topic: Home made half round rasp  (Read 5159 times)

0 Members and 1 Guest are viewing this topic.

Offline seabass

  • Member
  • Posts: 2,267
Re: Home made half round rasp
« Reply #30 on: February 12, 2014, 06:25:26 pm »
did you reverse every other blade so it cut on both strokes?
Logged
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Home made half round rasp
« Reply #31 on: February 12, 2014, 07:29:10 pm »
No Steve, I put them all facing the same direction.  While I was using it today I switched it around and pulled it for a while. 

I squared up a handle and then tried it out.  It took me a minute to figure out the best angle to hold it.




Logged
I started out with nothin' and I still got most of it left

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Home made half round rasp
« Reply #32 on: February 13, 2014, 11:03:57 pm »
Cool, looks like it works pretty good!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: 1 2 [3]
« previous next »