« previous next »
Pages: [1] 2

Author Topic: One Step Further Along...  (Read 2932 times)

0 Members and 1 Guest are viewing this topic.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
One Step Further Along...
« on: February 09, 2014, 04:12:04 pm »
Well I took another small step along the road to one day becoming a Bowyer...

I started this bow the first week of January when my Mini Monkey Elyas went in to the Hospital...
Lord knows it helped keep my feet on the Ground.

Crepe Myrtle
1.5 inches wide for all but the last six inches or so, tapering to 7/16 at the Nocks.
45" Nock to Nock
Pulling 45# @ 22.5 inches...
Texas Ebony overlays
Mild Hollow Limb design
Started with 1.5 inches of reflex.
Was sitting at 3/4 inch of set when un strung.

Had Forty Nine shots through her when she let go... Tension Failure.
I was asking her to do A Lot...
And she was doing it well, right till the end...
And it was that Last Shot (#50) before I was gonna put the Lip Stick on...   :'(

Such is Life... I've already started another...

The Point of Growth is this is my first Failure...
It took me Thirty bows to get here.
And I seriously doubt I would have made it this far without a failure, if I didn't have access to this site and the Great Folks on Here.

I hate to see this bow go, she was light as a feather in hand.
I know... A Stiff Hanndle, well mostly, on a bow this short... 
It's what was in my head, and had to try it...

:)

Here she is:











Think I'll glue her back together and make a Wall Hanger out of her...

Thanks for looking...

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: One Step Further Along...
« Reply #1 on: February 09, 2014, 04:15:12 pm »
That sucks Gus.  Sorry man that was looking good
Logged

Offline 4dog

  • Member
  • Posts: 1,610
Re: One Step Further Along...
« Reply #2 on: February 09, 2014, 05:36:45 pm »
note to self...bend in the handle for myrtle...sorry dude she was lookin good too    :-\
Logged
"SET" is always there !!!

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: One Step Further Along...
« Reply #3 on: February 09, 2014, 06:58:36 pm »
  Glad it didn't break clean and hurt you, she was perrrrrty.
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: One Step Further Along...
« Reply #4 on: February 09, 2014, 07:05:42 pm »
Sorry Gus.  Try 'er again and go bendy next time at that length.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Arrowind

  • Member
  • Posts: 1,428
Re: One Step Further Along...
« Reply #5 on: February 09, 2014, 08:53:23 pm »
dang.  Sorry to see that! 
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline DuBois

  • Member
  • Posts: 2,020
Re: One Step Further Along...
« Reply #6 on: February 10, 2014, 07:27:17 am »
Bummer Gus.
Looks like a beauty while it lasted. I know what you mean- just gotta try things sometimes.

Hows the monkey doing?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: One Step Further Along...
« Reply #7 on: February 10, 2014, 07:40:58 am »
Gus Im under the impression it broke due to the hollow limb, Im still not sold on that being a viable option. It split along the back because it collapsed on itself. The shear was only after the split occurred I bet. Ive never used CM. But I know friends that have. Its good wood. A flat or slightly radiused belly would have helped IMO and probably made a bow out of it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PatM

  • Member
  • Posts: 6,737
Re: One Step Further Along...
« Reply #8 on: February 10, 2014, 10:18:14 am »
The back also looks like it has been treated a bit roughly.
Logged

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: One Step Further Along...
« Reply #9 on: February 10, 2014, 11:25:25 am »
I Hear ya Fellas...

I was pushing this piece harder than I should have...

4dog and SLIMBOB
The handle was Semi Stiff, it did bend at full draw, but not enough...

PD.
I got Greedy and was hoping to hang on to Draw Weight by using the HLD to retain extra Width...
The first thing that got me thinking of using the HLD design on this one was the big knot on the outer portion of the top limb. I felt that it needed to at least bend into that knot if not through it...

PatM.
What you're seeing is some Cambium left over...
I took my time taking the bark off and was careful not to violate the back...  :)
There are a bunch of humps, bumps and valleys on this stuff.

CM is some pretty tough stuff over all.
I roughed out another piece,  about eight inches longer.
Tried leaving the bark on, but it won't stay.
But it started shedding bark at Floor Tiller...
But that's okay...

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: One Step Further Along...
« Reply #10 on: February 10, 2014, 11:28:49 am »
Hey Gussy notice the collapse started and stopped within the hollow section?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: One Step Further Along...
« Reply #11 on: February 10, 2014, 11:44:06 am »
Ouch! Sorry to see that Gus.
Knapper
Logged
Ad Dare Servire
PM104250

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: One Step Further Along...
« Reply #12 on: February 10, 2014, 11:53:17 am »
I don't know what happened but do know some have liked that design with fg bows. Try going longer. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline PatM

  • Member
  • Posts: 6,737
Re: One Step Further Along...
« Reply #13 on: February 10, 2014, 12:12:34 pm »
I know that is leftover bits of bark and cambium, but still. The exposed bits of actual wood don't look very pristine. What did you de-bark with?
Logged

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: One Step Further Along...
« Reply #14 on: February 10, 2014, 01:32:27 pm »
PD.
I think I see what you are seeing.
The main part of the rupture is 3 inches down the limb,  in the deeper part of the hollow.
The splinter started abiut 5 inches down the limb at a little hump in the back.
Are you thinking the Rupture Lifted the Splinter?
Or the Splinter led to the Rupture?

PatM.
I did handle it gently... used a freshly sharpened scraper.
Though I find in retrospect, CM doesn't really like the scraper much.
And the wood distorts easily with a thumb nail...
I don't see an obvious flaw at the failure, but can't fully rule it out.
The next time I skin the bark on CM I'll sand it Too...  :)

Mr Tsoukalas.
Yes Sir I hear ya...
I got All the length I could outa this piece...
The next piece is 8 inches longer...  :)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX
Pages: [1] 2
« previous next »