« previous next »
Pages: 1 ... 16 17 [18] 19 20 ... 78

Author Topic: 2014 bow trade works in progress  (Read 247059 times)

0 Members and 1 Guest are viewing this topic.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: 2014 bow trade works in progress
« Reply #255 on: February 13, 2014, 11:06:15 am »
That one is shaping up real niiiiice.  I dig them curves
Logged

Offline DuBois

  • Member
  • Posts: 2,020
Re: 2014 bow trade works in progress
« Reply #256 on: February 13, 2014, 11:44:01 am »
Dang Laflair!
That is awesome. Now who's makin who look bad?
My poor little buckthorn is feeling ugly  :'(
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2014 bow trade works in progress
« Reply #257 on: February 13, 2014, 11:50:39 am »
I was going simple but simple don't cut it for me. I just wanna give the guy my best effort. About 2" of each recurve will be cut off after reflexing. Going for small fairly sharp curves
Logged
Nothing ventured nothing gained

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #258 on: February 13, 2014, 12:13:04 pm »
looking good man.
Logged

Offline koan

  • Member
  • Posts: 2,396
  • Brian D. Mo.
Re: 2014 bow trade works in progress
« Reply #259 on: February 13, 2014, 12:19:09 pm »
Nice curves man!
Logged
When you complement a lady on her dress.....make sure she is the one wearing it.....

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: 2014 bow trade works in progress
« Reply #260 on: February 13, 2014, 03:09:49 pm »
Alright, so the steamed reflex is completely gone. It's returned to its original deflexed state, which I usually like but for a trade bow I'd rather at least ship something with no string follow.





I'm putting it through more heat treatment, so do you think I should try to induce reflex again and bend the levers a little this time? Really the bottom limb is flat relative to the handle, it's the upper that's got deflex.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: 2014 bow trade works in progress
« Reply #261 on: February 13, 2014, 03:20:10 pm »
Quote from: huisme on February 13, 2014, 03:09:49 pm
Alright, so the steamed reflex is completely gone. It's returned to its original deflexed state, which I usually like but for a trade bow I'd rather at least ship something with no string follow.





I'm putting it through more heat treatment, so do you think I should try to induce reflex again and bend the levers a little this time? Really the bottom limb is flat relative to the handle, it's the upper that's got deflex.

Shoot, if it was me, I would call it a bow, it don't look that bad to me.  ;D
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: 2014 bow trade works in progress
« Reply #262 on: February 13, 2014, 03:46:22 pm »
Nothing wrong with a little follow.


Was hoping to start on my trade bow tomorrow.........but the bow i was just shooting in blew on me today. So off to chase a ring.
Logged
Steve Bennett

Offline bubby

  • Member
  • Posts: 11,054
Re: 2014 bow trade works in progress
« Reply #263 on: February 13, 2014, 04:19:18 pm »
That's not bad
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,663
Re: 2014 bow trade works in progress
« Reply #264 on: February 13, 2014, 05:03:15 pm »
If you want the reflex to remain(as long as you do your part) use dry heat and temper the belly while you're at it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 4dog

  • Member
  • Posts: 1,610
Re: 2014 bow trade works in progress
« Reply #265 on: February 13, 2014, 06:03:12 pm »
nothing wrong woth a lil follow
Logged
"SET" is always there !!!

Offline pincushin

  • Member
  • Posts: 133
Re: 2014 bow trade works in progress
« Reply #266 on: February 13, 2014, 06:29:31 pm »
is it all right if what we build is a bow that is meant to have a slightly shorter draw? if that is not i have no problem with crafting something that is longer
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #267 on: February 13, 2014, 06:33:31 pm »
build what ever your comfortable with building. your recips specs are their preference but no one minds getting a short bow.
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2014 bow trade works in progress
« Reply #268 on: February 13, 2014, 06:58:14 pm »
My 30" draw doesn't like short bows. Lol
Logged
Nothing ventured nothing gained

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: 2014 bow trade works in progress
« Reply #269 on: February 13, 2014, 07:07:13 pm »
I agree Blaflair2, I think you should get as close as you can. One of the reasons I don't build short draw bows for myself is that I can't break the habit of coming to full draw. I have built them for others that fit them though and wished I could get accustomed to shooting them.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.
Pages: 1 ... 16 17 [18] 19 20 ... 78
« previous next »