Author Topic: 2014 bow trade works in progress  (Read 231875 times)

0 Members and 1 Guest are viewing this topic.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: 2014 bow trade works in progress
« Reply #1020 on: July 19, 2014, 10:37:51 pm »
Good for you man.  Can't wait to see the pics

Offline bubby

  • Member
  • Posts: 11,054
Re: 2014 bow trade works in progress
« Reply #1021 on: July 19, 2014, 10:52:49 pm »
congrats duck, bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bushboy

  • Member
  • Posts: 2,256
Re: 2014 bow trade works in progress
« Reply #1022 on: July 21, 2014, 10:46:57 am »
My elm sap came in at the low end of the weight spec,so I grabbed and osage stave preshaped ,got it mostly done over the weekend,got to tweek the tiller and shoot it in.R/d design,very smooth!pics tonight I hope!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline wildkatt

  • Member
  • Posts: 387
Re: 2014 bow trade works in progress
« Reply #1023 on: July 21, 2014, 12:38:14 pm »
 ;D Glad it got there safe, Hope you like it  >:D Post some pics ,I didnt get many bow shop flooded most of time during build. :o


Katt
I didnt claw my way to the top of the food chain to eat vegies

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: 2014 bow trade works in progress
« Reply #1024 on: July 21, 2014, 01:09:49 pm »
Finished floor tiller early this morning then onto the long string and a few scrape and excercise sessions. I will work the outer 1/3 a bit more then file nocks and brace with the short string in the morning. Pulling 50@22 on the long string. Lower limb showing a tad stiff but that's the way I like to start them.
« Last Edit: July 21, 2014, 01:12:50 pm by Fred Arnold »
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline WoodBenderDW

  • Member
  • Posts: 74
Re: 2014 bow trade works in progress
« Reply #1025 on: July 21, 2014, 06:56:49 pm »
My tradebow is tillered and ready for final sanding and stain and finish. It should be ready to ship in a couple of weeks. 

Offline WoodBenderDW

  • Member
  • Posts: 74
Re: 2014 bow trade works in progress
« Reply #1026 on: July 21, 2014, 07:15:42 pm »
Here is the trade bow that I received from Bubbles.  I can honestly say that out of fiberglass longbows and recurve bows and wooden selfbows, this truly is one of the best shooting bows that I've ever shot.  Thank you so much for it.  There is even a compound bow purist at the archery club that thinks it is amazing.  It is hickory backed white oak.    I think I might have a special use for it on October 1st this year (opening day of deer season in Ontario)  It shoots point on at about 15 yards.

Offline WoodBenderDW

  • Member
  • Posts: 74
Re: 2014 bow trade works in progress
« Reply #1027 on: July 21, 2014, 07:18:36 pm »
Just for fun, here is the Penebscot version of it.  Lol.  This is what happens when you don't check what's in the background before you snap a picture.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #1028 on: July 21, 2014, 07:22:41 pm »
sweet bow man, good job Bubbles

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: 2014 bow trade works in progress
« Reply #1029 on: July 21, 2014, 09:09:53 pm »
Mark me as shipped.  (Someone should expect a package Thursday) And RECIEVED. When i got home from work today there was a tube awaiting. Cant believe i shipped and received on the same day.  ;D 

Opened a tube all the way from the great state of Texas to find a beautiful bow from Ink. Its now the best looking smoothest drawing bow i own. And it hits right where i look. I couldn't ask for a nicer bow. Thanks Jason.

Its a 64" American elm 42#@28" and has just a touch of character and great attention to detail in the finish. Smooth drawing and zips an arrow right along. I'll let my poor picture taking skills try to tell ya the rest. My pics just don't do it justice. Thanks again Jason.








Steve Bennett

Offline Ink

  • Member
  • Posts: 301
  • Jason Chollett
Re: 2014 bow trade works in progress
« Reply #1030 on: July 21, 2014, 09:12:13 pm »
I'm glad you like it steve, Hope it gives you years of good shooting.
Chew Motrin, drink water, drive on

Offline 4dog

  • Member
  • Posts: 1,610
Re: 2014 bow trade works in progress
« Reply #1031 on: July 22, 2014, 12:06:40 am »
i ALMOST got to shoot that one ...but i did get to see it before it was tricked out...jason makes a very nice bow....i had two...now i got one...lol...she will serve you well turtle.
"SET" is always there !!!

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: 2014 bow trade works in progress
« Reply #1032 on: July 22, 2014, 10:09:54 am »
That looks like a sweet bow there.  Congrats

Offline autologus

  • Member
  • Posts: 1,092
Re: 2014 bow trade works in progress
« Reply #1033 on: July 22, 2014, 11:18:48 am »
Those are some fine bows, I sure hope my work will be up to snuff.

Grady
Proud Hillbilly from Arkansas.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: 2014 bow trade works in progress
« Reply #1034 on: July 22, 2014, 12:11:58 pm »
awesome bow ink