« previous next »
Pages: [1] 2

Author Topic: Last BL retiller check (more pics)  (Read 4735 times)

0 Members and 2 Guests are viewing this topic.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Last BL retiller check (more pics)
« on: February 01, 2014, 02:54:12 pm »



This is a bow that has been messing with me on the tiller.  It is pulling 45#@24" but I will work it out to 26.  The top tip looks a little stiff to me but there is a couple of knots there.  Front few is pyramidal and about 60" long.
« Last Edit: February 03, 2014, 01:34:00 am by IdahoMatt »
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: BL tiller check
« Reply #1 on: February 01, 2014, 03:00:59 pm »
Dang it didn't post the pic just the link.  I know I have read how to post pics but I can't remember.
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: BL tiller check
« Reply #2 on: February 01, 2014, 03:50:21 pm »
It looks to me like the upper limb is stiffer than the bottom, and like I'd weaken the upper limb in the outermost parts.

I want to see that cluster of pin knots better ;)

This:

Turned into this


So you hit the image button and paste the image url between the middle brackets.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: BL tiller check
« Reply #3 on: February 01, 2014, 04:11:08 pm »
That link might get you in trouble, I clicked it and it took me to advertisements.

Use the IMG code for pics from photobucket
Logged
Clatskanie, Oregon

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: BL tiller check
« Reply #4 on: February 01, 2014, 04:27:53 pm »
Thanks Bryce. 
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: BL tiller check
« Reply #5 on: February 01, 2014, 04:30:43 pm »
Quote from: huisme on February 01, 2014, 03:50:21 pm
It looks to me like the upper limb is stiffer than the bottom, and like I'd weaken the upper limb in the outermost parts.

I want to see that cluster of pin knots better ;)

This:

Turned into this


So you hit the image button and paste the image url between the middle brackets.


Thanks man will do,  I'll try to get some pics when I get home
Logged

Offline TRACY

  • Member
  • Posts: 4,523
Re: BL tiller check
« Reply #6 on: February 01, 2014, 06:55:03 pm »
Top limb is stiffer than the bottom looking at the pic.

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: BL tiller check
« Reply #7 on: February 01, 2014, 11:02:28 pm »
Thanks Tracy.  I'll try to get some work done on it tomorrow and post the result.
Logged

Offline adams89

  • Member
  • Posts: 205
Re: BL tiller check
« Reply #8 on: February 02, 2014, 10:01:02 am »
I think the outer thirds on this bow ( with a parallel limg desing ) need to work a little more an the the whole top limb in it self,

really nice bow! i like it!
Logged

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: BL tiller check
« Reply #9 on: February 02, 2014, 11:54:03 am »
I agree, get the top (outer) caught up with the bottom.  Shouldn't take much.  Looks like it has a sweet shape to it.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

mikekeswick

  • Guest
Re: BL tiller check
« Reply #10 on: February 02, 2014, 02:30:35 pm »
If the stave was dead straight to start with then it's bending too much inner lower limb. The upper's shape is good. Until you get the mid and outer lower limb bending more (to reduce the stress on the inner) keep the upper 'as is' shape-wise. O#r at least that's what i'd do. Also keep a very close eye on the set. This tells you without doubt where it needs reducing  :)
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: BL tiller check
« Reply #11 on: February 02, 2014, 02:34:18 pm »
+1 to wot they all said.
Lower is a bit weak.
Cool waggly bow :)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: BL tiller check
« Reply #12 on: February 02, 2014, 06:47:16 pm »
Here are a couple more pics.  The bottom limb has a little whoopdy do right after the fade.  It has hardly taken any set.  Maybe 1/2"





« Last Edit: February 02, 2014, 07:05:07 pm by IdahoMatt »
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: last time BL retiller check (more pics)
« Reply #13 on: February 03, 2014, 01:33:25 am »
Last time.  Thanks guys.  I don't know why this one has me cross eyed."

Logged

mikekeswick

  • Guest
Re: Last BL retiller check (more pics)
« Reply #14 on: February 03, 2014, 04:28:27 am »
Ah ha! That explains the lower limb.
It's looking good. I would shoot 50 arrows out of it now and see if it changes. If not i'd probably use a file and then sandpaper to get out to full draw.
Like I said watch the set - this tells you everything from now on out. Remeber the golden rule. No set in the inner limbs a little mid limb and moist from mid limb out to the tips.
Logged
Pages: [1] 2
« previous next »