« previous next »
Pages: [1] 2

Author Topic: Too Glossy tru-oil  (Read 8857 times)

0 Members and 2 Guests are viewing this topic.

Offline DuBois

  • Member
  • Posts: 2,020
Too Glossy tru-oil
« on: February 01, 2014, 08:00:17 am »
How do you guys get rid of a little of the gloss from tru-oil? Just seems a little shiny.
Thanks, Marco
Logged

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Too Glossy tru-oil
« Reply #1 on: February 01, 2014, 08:03:15 am »
I go over it lightly with fine steel wool then wax it.
Logged
Steve Bennett

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Too Glossy tru-oil
« Reply #2 on: February 01, 2014, 08:35:37 am »
I've put a coat of spray satin polyurethane over tru-oil on bows I wanted to hunt with.
Logged
I started out with nothin' and I still got most of it left

Offline 4dog

  • Member
  • Posts: 1,610
Re: Too Glossy tru-oil
« Reply #3 on: February 01, 2014, 09:26:10 am »
wax does work
Logged
"SET" is always there !!!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Too Glossy tru-oil
« Reply #4 on: February 01, 2014, 09:53:10 am »
When I use Tru Oil on a bow I follow it with satin spar urethane. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: Too Glossy tru-oil
« Reply #5 on: February 01, 2014, 10:01:59 am »
Im with turtle, using some steel wool works real nice. I like the satin finish coating idea, have got to try that out some time
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Too Glossy tru-oil
« Reply #6 on: February 01, 2014, 10:03:12 am »
You could just use tung oil instead too? I know this doesn't really answer your question, but I prefer tung oil when I want a matte finish.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Too Glossy tru-oil
« Reply #7 on: February 01, 2014, 10:06:15 am »
I used to buff with steel wool which does dull the Tru-Oil finish but after a while the shine comes back. Now I spray with satin poly and that works very well and stays dull. It only takes a quick spray to cut the shine.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DuBois

  • Member
  • Posts: 2,020
Re: Too Glossy tru-oil
« Reply #8 on: February 01, 2014, 11:49:58 am »
Quote from: turtle on February 01, 2014, 08:03:15 am
I go over it lightly with fine steel wool then wax it.
I've got no heat in the garage so it is all inside with the family and poly is pretty strong smelling.
What kind of wax do you use?
Logged

Offline Adam

  • Member
  • Posts: 913
Re: Too Glossy tru-oil
« Reply #9 on: February 01, 2014, 12:23:55 pm »
I've had good luck with Johnson's Paste Wax.
Logged

Offline koan

  • Member
  • Posts: 2,393
  • Brian D. Mo.
Re: Too Glossy tru-oil
« Reply #10 on: February 01, 2014, 12:32:27 pm »
I use good ol unpurified beeswax... Im not convinced that i even need the tru-oil under it IMO... Brian
Logged
When you complement a lady on her dress.....make sure she is the one wearing it.....

Offline DuBois

  • Member
  • Posts: 2,020
Re: Too Glossy tru-oil
« Reply #11 on: February 01, 2014, 12:45:49 pm »
I have some bees wax! I'll give it a shot when I get off work  ;D Thanks folks.
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: Too Glossy tru-oil
« Reply #12 on: February 03, 2014, 09:54:44 pm »
I learned from Gordon to sand the final coat with emery paper and water and then to buff it with a mixture of cooking oil and pumice powder to make a silky smooth and satin finish. It has a little shine but it is definitely not glossy. Make sure you have enough coats of tru-oil though. at least 6 and 8-9 is better.
Logged

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Too Glossy tru-oil
« Reply #13 on: February 04, 2014, 12:43:25 am »
Quote from: Weylin on February 03, 2014, 09:54:44 pm
I learned from Gordon to sand the final coat with emery paper and water and then to buff it with a mixture of cooking oil and pumice powder to make a silky smooth and satin finish. It has a little shine but it is definitely not glossy. Make sure you have enough coats of tru-oil though. at least 6 and 8-9 is better.

Yep!
Start with the medium grit pumice then move to the fine. Flawless satin finish everytime.
Logged
Clatskanie, Oregon

Offline DuBois

  • Member
  • Posts: 2,020
Re: Too Glossy tru-oil
« Reply #14 on: February 04, 2014, 01:09:47 am »
You buy pumice in the hardware store?
Logged
Pages: [1] 2
« previous next »