« previous next »
Pages: [1]

Author Topic: Looking for some horns for a drinking vessel.  (Read 2409 times)

0 Members and 1 Guest are viewing this topic.

Offline tattooDude

  • Member
  • Posts: 5
Looking for some horns for a drinking vessel.
« on: January 21, 2014, 02:22:00 am »
I have cane for arrows, leather for whatever and some stave's black locust, persimmon and ash all aged over 2 yrs. I'm looking for some horns that I can make into drinking horns. I don't really care what the color is or what they are from, unicorn would be mythical, but I want them to be able to hold at least a pint of whatever I'm drinking. If you have any other things you may be looking for I might have them just ask.

Kind regards,
Jay
Logged

Offline Dharma

  • Member
  • Posts: 453
  • Kayenta, AZ
Re: Looking for some horns for a drinking vessel.
« Reply #1 on: January 25, 2014, 04:44:21 pm »
I have a finished drinking horn, black with carry strap. PM me if interested.
Logged
An arrow knows only the life its maker breathes into it...

Offline DuBois

  • Member
  • Posts: 2,020
Re: Looking for some horns for a drinking vessel.
« Reply #2 on: January 25, 2014, 06:36:44 pm »
PM sent.
Logged

Offline tattooDude

  • Member
  • Posts: 5
Re: Looking for some horns for a drinking vessel.
« Reply #3 on: January 27, 2014, 11:27:09 am »
I'm looking for some to go through the making process but thanks for the reply. I pmed you back DuBois.
Logged

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Looking for some horns for a drinking vessel.
« Reply #4 on: January 27, 2014, 12:09:50 pm »
Howdy,  PM sent.   I've got several horns, just sitting around.   Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline tattooDude

  • Member
  • Posts: 5
Re: Looking for some horns for a drinking vessel.
« Reply #5 on: January 28, 2014, 10:44:51 pm »
Here are three of the staves from left to right ash 72" persimmon 68" persimmon 68" and all sizes of cane shafts.

The two persimmon have a bit of twist to them but I have been able to bend with heat just fine. All of the staves have been dried for at least 4 yrs.
Logged

Offline tattooDude

  • Member
  • Posts: 5
Re: Looking for some horns for a drinking vessel.
« Reply #6 on: February 04, 2014, 07:26:14 pm »
One of my clients works at a vet and he said he can get me all the horns I need, so thanks for all the replies and offers but I have plenty to work with now.
Logged
Pages: [1]
« previous next »