Author Topic: Arrow shaft started  (Read 3220 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Arrow shaft started
« on: May 22, 2017, 12:38:21 pm »
Life is far too serious to be taken that way!
Jerry

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Arrow shaft started
« Reply #1 on: May 22, 2017, 12:43:21 pm »
Actually whole shaft!https://i.imgur.com/q2M33Mw.jpg
Life is far too serious to be taken that way!
Jerry

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Arrow shaft started
« Reply #2 on: May 22, 2017, 12:45:38 pm »
Life is far too serious to be taken that way!
Jerry

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Arrow shaft started
« Reply #3 on: May 22, 2017, 12:58:56 pm »
Finished arrow - 583 gr, spine 60# or so
https://i.imgur.com/xrrK9rM.jpg
Life is far too serious to be taken that way!
Jerry

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Arrow shaft started
« Reply #4 on: May 23, 2017, 09:18:05 am »
Sorry don't know how to view your pics
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Online bjrogg

  • Member
  • Posts: 11,022
  • Cedar Pond
Re: Arrow shaft started
« Reply #5 on: May 23, 2017, 12:09:44 pm »
Nice looking arrow Hawkdancer. Guy I just clicked on the link and got them. Hawkdancer sorry I couldn't seem to figure out how to post your Atlatl pictures. I've been real busy maybe I'll can figure it out when I get more time. Very nice Atlatl. Maybe you could tell us a little more about your arrow. What type of shaft and fletching.
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Arrow shaft started
« Reply #6 on: May 23, 2017, 04:04:49 pm »
BJ,
The shaft was part of the raw material trade, it appears to be red osier dogwogwod based on the white pith color and the leaf nodules (opposite leaves/branches) offsetting 90 degrees each pair, however Outback thought that they may be viburnum.  The fletching is full length turkey feather left wing, from Trueflight,  Found them at a local shop, used the 2 fletch pattern, because I only got 4 feathers >:D!  I plan to get busy and prep my wild wings after I get enough shafts ready.  The cresting is more or less the pattern of the crest on my original arrows from way back when, before back in the day, and been there, done that😀😂👹.  The finish is 1 part beeswax/4 parts flax oil, but I think I am going to up the beeswax to 2:4.
Hawkdancer
Life is far too serious to be taken that way!
Jerry