« previous next »
Pages: [1]

Author Topic: tiller check, please  (Read 2631 times)

0 Members and 1 Guest are viewing this topic.

Offline steve b.

  • Member
  • Posts: 999
tiller check, please
« on: December 25, 2013, 08:05:36 pm »
I posted this bow a week or so ago and had the tiller all wrong.  By the time I loosened up the stiff areas the bow was getting too low in draw weight so I moved the string nocks down an inch each.  Now its 64" NtN.  I'm amazed there's no set at this point and the draw weight would end up around 55 lbs. if I didn't continue to tiller.....

...but as you can see its still too stiff in the upper limb upper half.  I swear it doesn't look that bad in the mirror.

Both limbs start bending about 14" from the tips, according to the a straight edge.  I actuallly want a little bend at the lever taper which is about 10" from the tip.

I'm curious what others see:

Logged

Offline steve b.

  • Member
  • Posts: 999
Re: tiller check, please
« Reply #1 on: December 25, 2013, 08:06:27 pm »
.

Logged

Offline steve b.

  • Member
  • Posts: 999
Re: tiller check, please
« Reply #2 on: December 25, 2013, 08:07:31 pm »
.

Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: tiller check, please
« Reply #3 on: December 25, 2013, 08:28:27 pm »
Id say you got it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: tiller check, please
« Reply #4 on: December 25, 2013, 09:30:18 pm »
Looks good to me on a very challenging stave.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: tiller check, please
« Reply #5 on: December 25, 2013, 09:56:31 pm »
Quote from: Del the cat on December 25, 2013, 09:30:18 pm
Looks good to me on a very challenging stave.
Del

+1
Logged
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline bubby

  • Member
  • Posts: 11,054
Re: tiller check, please
« Reply #6 on: December 25, 2013, 10:23:58 pm »
looks good, the only way to get some bend in the levers is to thin them up some
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline steve b.

  • Member
  • Posts: 999
Re: tiller check, please
« Reply #7 on: December 25, 2013, 10:33:26 pm »
Thanks all. 

Yea, per Blackhawk's recommendation I'm going to, "get the levers moving just a little, near the fades".  Then call it quits on this one.  It won't turn out to be the monster I thought it was but I'm happy regardless.  Needs overlays, leather dye, and handle wrap........................
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: tiller check, please
« Reply #8 on: December 26, 2013, 04:43:44 pm »
Nice work, it'll make meat.
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: tiller check, please
« Reply #9 on: December 26, 2013, 04:46:38 pm »
That thing is looking pretty good
Logged
Pages: [1]
« previous next »