« previous next »
Pages: [1]

Author Topic: Largest spall I have ever worked...  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

Offline seminolewind

  • Member
  • Posts: 659
Largest spall I have ever worked...
« on: December 25, 2013, 05:12:06 am »
Trapper Rob sent me this big 4.5lb spall of Keokuk, this is the biggest piece I have ever knapped. My brother has been asking for quite some time for a gnarly spear point to haft and stick a hog with, hope he likes this. Here it is, all direct percussion and pressure.

Hope y'all have a MERRY X-MAS !!!
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #1 on: December 25, 2013, 05:14:52 am »
final product just at 7"
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Largest spall I have ever worked...
« Reply #2 on: December 25, 2013, 06:30:51 am »
You did that piece justice Elijah that was the biggest spall I ever bought it's been laying in the barn for about 5 or 6 years. Awesome point bud.

Merry Christmas.
Logged

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #3 on: December 25, 2013, 07:36:11 am »
Thanks man I really appreciate it!
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Largest spall I have ever worked...
« Reply #4 on: December 25, 2013, 08:01:21 am »
Great job on that one!
Logged
(:::.) The ABO path is a new frontier to the past!

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Largest spall I have ever worked...
« Reply #5 on: December 25, 2013, 10:33:01 am »
That turned out nice as usual man! Nother goodun :).
« Last Edit: December 26, 2013, 09:46:55 am by cowboy »
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Largest spall I have ever worked...
« Reply #6 on: December 25, 2013, 11:08:45 am »
Wow, very impressive! Nice work.

George
Logged
St Paul, TX

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Largest spall I have ever worked...
« Reply #7 on: December 25, 2013, 12:18:39 pm »
Dang, Buddy, that is nice! Post a picture when your brother sticks one. I'm going after hogs in Ga. this weekend.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #8 on: December 25, 2013, 01:07:54 pm »
Quote from: mullet on December 25, 2013, 12:18:39 pm
Dang, Buddy, that is nice! Post a picture when your brother sticks one. I'm going after hogs in Ga. this weekend.

Nice man hope you get some, I have a hunt set up for when I get home can't wait !
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #9 on: December 25, 2013, 01:08:54 pm »
Thanks everyone hope you had a good Christmas !!!
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: Largest spall I have ever worked...
« Reply #10 on: December 25, 2013, 01:44:10 pm »
Very nice work. can you get any points from the pieces you took off of that?
Logged

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #11 on: December 25, 2013, 02:10:49 pm »
Yes there were about 4 flakes that will make small 50-55 grain points but that's about it
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: Largest spall I have ever worked...
« Reply #12 on: December 26, 2013, 02:42:43 am »
Nice and clean point!  Send some pictures of it hafted as a finished spear!  Some day I will make it to a wild hog hunt!  For awhile they had a problem with wild Russian boar that escaped from a game farm that multiplied and was uprooting hundreds of acres and gave out permits to wipe them out...I might have to drive a few hours south!  Again nice work and good luck to your brother!

Russ
Logged
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill

Offline Bone pile

  • Member
  • Posts: 1,491
Re: Largest spall I have ever worked...
« Reply #13 on: December 26, 2013, 08:36:21 am »
Good lookin' point,that should put a hurtin' on an old piney rutter.
Logged
Venice Florida

Offline seminolewind

  • Member
  • Posts: 659
Re: Largest spall I have ever worked...
« Reply #14 on: December 26, 2013, 10:09:40 am »
Quote from: Bone pile on December 26, 2013, 08:36:21 am
Good lookin' point,that should put a hurtin' on an old piney rutter.

Hey Rog not sure if you know it but you taught me the most important thing about direct percussion in my flintknapping career. Flakes only travel over convexity. Since then i work my spalls into a lenticular form first, and have way less hinges and stack. Thanks man !
Logged
"Those that beat their swords into plowshares will plow for those who do not." Thomas Jefferson

Elijah,
Tampa, FL.
Pages: [1]
« previous next »