« previous next »
Pages: 1 [2] 3

Author Topic: Asymmetrical vine maple bow  (Read 8972 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Asymmetrical vine maple bow
« Reply #15 on: December 15, 2013, 04:11:17 pm »
That's a very nice bow Gordon.  I like when irregularities like that are incorporated in the finished bow.  It shows the talent level of the bowyer.
Logged
I started out with nothin' and I still got most of it left

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Asymmetrical vine maple bow
« Reply #16 on: December 15, 2013, 05:26:07 pm »
    only someone w/experience how knotty vine maple can be. well done.

                                                     chuck
Logged
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline Weylin

  • Member
  • Posts: 2,296
Re: Asymmetrical vine maple bow
« Reply #17 on: December 15, 2013, 05:32:19 pm »
Here Gordon. Let me help you with that. I can tell you had some trouble tillering that bow because the full draw doesn't look like a perfect ellipse. This picture should help you fix the tiller. You can tell where the problem is by all the important looking lines I drew. You're welcome.  >:D

Logged

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Asymmetrical vine maple bow
« Reply #18 on: December 15, 2013, 06:36:03 pm »
HAHAHAHAHAHAHAHAHAHAHA OMGOSH! Weylin your killin me bro.
Thats hysterical!
 ;D :laugh:


Dave looks good in them ears
Logged
Clatskanie, Oregon

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Asymmetrical vine maple bow
« Reply #19 on: December 15, 2013, 06:56:57 pm »
Good stuff Weylin  :laugh: :laugh:,  I hope you will do that for me on the next bow I post, it would be quite helpful.

Gordon, great job on that bow looks amazingly smooth when at full draw and as always I love the way you finish them. I've had a couple like that from buckthorn and agree with you, just can't fight 'em so ya gotta go with it.
Excellent job you did on yours.
Logged
I ain't broke but I'm badly bent.

Offline Will H

  • Member
  • Posts: 2,120
Re: Asymmetrical vine maple bow
« Reply #20 on: December 15, 2013, 07:23:08 pm »
That is one classy bow there Gordon! I always look forward to seeing your work. You are a master of the craft.
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Asymmetrical vine maple bow
« Reply #21 on: December 15, 2013, 07:57:08 pm »
Nice bow!  I like the asymmetric limbs.  Looks really cool.   I love the finish too. Thanks for sharing!
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline Gordon

  • Member
  • Posts: 3,299
Re: Asymmetrical vine maple bow
« Reply #22 on: December 16, 2013, 02:03:20 am »
Thank you for the compliment Crogacht. The bow is being held correctly.

Thank you Ryan.

Hey Carson, thank you. I'm glad you like the profile.

Thank you for the nice words Matt. I used a brown and green dye to stain the bow.

Thank you Jodocus.

Thank  you for the compliment Outlaw.

Thank you Chuck, I appreciate it.

That's hilarious Weylin. I laughed so hard I almost cried.

Thank you Bent. When you make enough bows you get used to having things go your way. And then one of these guys comes along and makes you humble again.

Will, thank you for the compliment.

Thank you Arrowind, I appreciate the kind words.
Logged
Gordon

Offline Dan K

  • Member
  • Posts: 405
  • 58#@28"
Re: Asymmetrical vine maple bow
« Reply #23 on: December 16, 2013, 02:54:55 am »
It's ok Gordon. ;)
Logged
Excellence is a state of mind.  Whether you think you can or can't...you're right!

Offline nathan elliot

  • Member
  • Posts: 211
Re: Asymmetrical vine maple bow
« Reply #24 on: December 16, 2013, 04:16:48 am »
Sweet looking bow, it takes real skill to know when to leave something rather than pushing it. That said I bet you tried every trick to get that limb behaving.

Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: Asymmetrical vine maple bow
« Reply #25 on: December 16, 2013, 07:13:43 am »
Good looking bow Gordon, from a challenging piece of wood for sure.Very nice work. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Asymmetrical vine maple bow
« Reply #26 on: December 16, 2013, 07:28:31 am »
That's a cool bow Gordon. I like that tiler job.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: Asymmetrical vine maple bow
« Reply #27 on: December 16, 2013, 08:35:15 am »
  Gordon you done an excellent job tillering that character limb. It looks well balanced from unstrung profile to the full draw bend. Everything moving well...Hat's off to ya...
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Parnell

  • Member
  • Posts: 5,556
Re: Asymmetrical vine maple bow
« Reply #28 on: December 16, 2013, 10:23:51 am »
Nice job Gordon.  It's always more interesting to think about irregular bows like this.  Just because they don't look "normal" doesn't mean they don't shoot well.  I bet you maxed out that tiller.  Nice job.
Logged
1’—>1’

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Asymmetrical vine maple bow
« Reply #29 on: December 16, 2013, 04:17:17 pm »
Very nice bow Gordon. Is the back natural or is it stained?
Knapper
Logged
Ad Dare Servire
PM104250
Pages: 1 [2] 3
« previous next »