Author Topic: sinew backing  (Read 1379 times)

0 Members and 1 Guest are viewing this topic.

Offline Lakota

  • Member
  • Posts: 10
sinew backing
« on: December 15, 2013, 10:30:51 pm »
 when applying sinew is it better to do two layers at one time or can the second layer be added later. Also if  a second layer can be added how long should one wait before proceding. I used TBlll not hide glue.  Could one use Knox gelatin over TBlll.
Thanks for any advice.

Lakota
« Last Edit: December 15, 2013, 10:39:23 pm by Lakota »

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: sinew backing
« Reply #1 on: December 15, 2013, 10:42:12 pm »
Tire bond 3 doesn't like to stick to itself. Hide glue doesn't like to stick to it either.
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline PatM

  • Member
  • Posts: 6,737
Re: sinew backing
« Reply #2 on: December 15, 2013, 10:44:41 pm »
I tried helping people out with this tutorial on how to add about four layers of sinew in one go but it didn't make the archives and will soon slip into oblivion. Here it is one more time though.
http://www.primitivearcher.com/smf/index.php/topic,43246.0.html

Offline bubby

  • Member
  • Posts: 11,054
Re: sinew backing
« Reply #3 on: December 16, 2013, 04:24:01 am »
it made it into my archives Pat, got it pinned to my favorites, personally I think it should be archived, bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹