« previous next »
Pages: [1] 2

Author Topic: My 1st Knife  (Read 4508 times)

0 Members and 1 Guest are viewing this topic.

Offline nlester

  • Member
  • Posts: 205
My 1st Knife
« on: December 12, 2013, 10:28:55 pm »
I've been wanting to make a knife for quite some time, so I decided to take the time to see if I could make one.  It was an average attempt, but I learned a lot from this project.  I'm looking forward to making another one.  All I have in this knife is time.  I had the horn, the stainless steel pins were cut from a rod I found laying around the shop, and the blade was made from an old concrete saw blade that a guy gave me.  Any suggestions would be welcomed.  :)

Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: My 1st Knife
« Reply #1 on: December 12, 2013, 11:35:17 pm »
I'd say it looks pretty good!  8) Not too shabby for your first. Looking forward to seeing your second.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Lone500

  • Member
  • Posts: 124
Re: My 1st Knife
« Reply #2 on: December 12, 2013, 11:49:24 pm »
nice knife im liking the profile of it looks comfortable for skinning and butchering.
Logged
Leon      Saluda, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: My 1st Knife
« Reply #3 on: December 13, 2013, 05:43:48 am »
Looks might fine to me,nice work. :) Knives get kind of like bow making[adictive.] ;) :) :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline dbb

  • Member
  • Posts: 745
Re: My 1st Knife
« Reply #4 on: December 13, 2013, 01:36:24 pm »
Good first knife,i like the curve of it!
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline Buffalogobbler

  • Member
  • Posts: 1,083
Re: My 1st Knife
« Reply #5 on: December 13, 2013, 03:30:39 pm »
Cool knife, I like the antler handle.

Kevin
Logged
Beer is living proof that god loves us and wants us to be happy-Ben Franklin

Offline KHalverson

  • Member
  • Posts: 756
Re: My 1st Knife
« Reply #6 on: December 13, 2013, 05:25:36 pm »
cool first knife.
question did you have to anneal the handle portion so you could drill the holes for the pins  or was the blade soft enough to drill?
again very cool first knife
Kevin
Logged

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: My 1st Knife
« Reply #7 on: December 13, 2013, 05:33:46 pm »
I love the profile of that!  Great job on first!
Logged
Aim Small...Hit Small

Offline nlester

  • Member
  • Posts: 205
Re: My 1st Knife
« Reply #8 on: December 13, 2013, 06:16:40 pm »
Thanks everyone.  I appreciate the kind words. I'm already thinking about the next knife project. KHalverson,I didn't annel before drilling and I had no problem.  I'd like to try and forge one from scrap steel.  That'll have to wait though. :) 
Logged

Offline Stoker

  • Member
  • Posts: 1,717
Re: My 1st Knife
« Reply #9 on: December 18, 2013, 10:42:54 am »
Good looking knife...
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Mohawk13

  • Member
  • Posts: 402
Re: My 1st Knife
« Reply #10 on: December 18, 2013, 01:39:20 pm »
Nice Knife. I would suggest making a nice heavy leather sheath and carrying it with pride...
Logged
He That Raises the sword against us, Shall be cleaved upon seven fold-Talmud.

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: My 1st Knife
« Reply #11 on: December 18, 2013, 03:56:44 pm »
You did good! dp
Logged
(:::.)    Osage music played daily. :)

Offline bow101

  • Member
  • Posts: 2,235
Re: My 1st Knife
« Reply #12 on: December 18, 2013, 11:15:43 pm »
Nice blade. I like the curve and handle.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Denham Archer

  • Member
  • Posts: 146
Re: My 1st Knife
« Reply #13 on: December 19, 2013, 09:08:25 am »
Good lookin' knife!   :D
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: My 1st Knife
« Reply #14 on: February 28, 2014, 09:08:10 pm »
Sweet, good work
Logged
Pages: [1] 2
« previous next »