« previous next »
Pages: 1 2 3 [4]

Author Topic: Yew flatbow build along(bear with me LOL)  (Read 14298 times)

0 Members and 5 Guests are viewing this topic.

Offline randman

  • Member
  • Posts: 647
Re: Yew flatbow build along(bear with me LOL)
« Reply #45 on: December 14, 2013, 08:44:21 pm »
I'm guessing the 3/4" is at the fades? Just by the looks of that nice thickness taper you got (and my limited familiarity with yew I've used), you should be getting enough floor tillered bend on those limbs to have at least a long string on it. I'd tiller it with a string a bit (at least check the bend) before thinning it very much more...
Logged
Beauty is in the eye of the beer holder.

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: Yew flatbow build along(bear with me LOL)
« Reply #46 on: December 14, 2013, 09:14:02 pm »
I found the problem of why that one limb was stiff. One was good for long string and the other was stiff. I measured it and I accidentally marked it a little bit thicker on the other limb. I scraped it down and now I am on to long string. I am going to cut the grooves in and then I will post pics of that.
Logged
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: Yew flatbow build along(bear with me LOL)
« Reply #47 on: December 15, 2013, 01:38:41 am »
Just cut in grooves and got the taper pretty symmetrical from .75" at fades to .5" at tips. Got the long string out and it looks like that one limb is a little stiff so I will work on that and post pics tomorrow.
Logged
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline bubby

  • Member
  • Posts: 11,054
Re: Yew flatbow build along(bear with me LOL)
« Reply #48 on: December 15, 2013, 02:02:58 am »
Quote from: BowSlayer on December 14, 2013, 07:07:52 pm
Lookin good but when marking out i would use a pencil and a sharp one. rather than a marker. it makes your work alot more acurate. can't wait to see a full draw. and also i would say cut your own wood, then you can't blame anyone but yourself ;) ;D although i also cut some yew in june/july and im not sure it's seasoned  :o





 slayer you also cut some yew, that wasn't yew ::) :laugh:, you know back when you were a squirrel
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowSlayer

  • Member
  • Posts: 644
Re: Yew flatbow build along(bear with me LOL)
« Reply #49 on: December 15, 2013, 04:51:26 am »
Quote from: bubby on December 15, 2013, 02:02:58 am
Quote from: BowSlayer on December 14, 2013, 07:07:52 pm
Lookin good but when marking out i would use a pencil and a sharp one. rather than a marker. it makes your work alot more acurate. can't wait to see a full draw. and also i would say cut your own wood, then you can't blame anyone but yourself ;) ;D although i also cut some yew in june/july and im not sure it's seasoned  :o





 slayer you also cut some yew, that wasn't yew ::) :laugh:, you know back when you were a squirrel

What I first thought was yew was cherry, and rotten wood at that. But I've found yrw in a local church yard.
Logged
London, England.

45#@28"

Offline bubby

  • Member
  • Posts: 11,054
Re: Yew flatbow build along(bear with me LOL)
« Reply #50 on: December 15, 2013, 06:44:31 pm »
yew didn't find me in a local church yard >:D





Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Traxx

  • Member
  • Posts: 1,018
Re: Yew flatbow build along(bear with me LOL)
« Reply #51 on: December 16, 2013, 03:43:06 am »
Good Grief!!!!
Logged

Offline sleek

  • Member
  • Posts: 6,743
Re: Yew flatbow build along(bear with me LOL)
« Reply #52 on: December 16, 2013, 04:50:28 am »
Oh jeeze bubby, I dont think even JW would have made that pun... lol.... ouch.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline bubby

  • Member
  • Posts: 11,054
Re: Yew flatbow build along(bear with me LOL)
« Reply #53 on: December 16, 2013, 06:49:11 pm »
Quote from: sleek on December 16, 2013, 04:50:28 am
Oh jeeze bubby, I dont think even JW would have made that pun... lol.... ouch.




yeah he would
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowSlayer

  • Member
  • Posts: 644
Re: Yew flatbow build along(bear with me LOL)
« Reply #54 on: December 16, 2013, 07:30:25 pm »
 :laugh: very pun-y,
Logged
London, England.

45#@28"

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: Yew flatbow build along(bear with me LOL)
« Reply #55 on: December 19, 2013, 01:02:19 am »
So I recurved it so it is like that deflex recurve pearly made, I have tillered a little and almost have it to low brace, i re did the backing because I thought it was a little sketchy being bent that many times, and it looks awesome. I am going to put elk or bison horn riser spikes, I will add bison on the tips an debating on putting osage or antler on top of the bison horn. What should I do? This will be put on after tillering. This will hopefully be my first legit recurve as the others have been flipped tips bows but we will see what it turns into. It is still pretty heavy. School Christmas break starts this Saturday so I will get this done within there to new year's.
Logged
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline BowSlayer

  • Member
  • Posts: 644
Re: Yew flatbow build along(bear with me LOL)
« Reply #56 on: December 19, 2013, 07:39:01 pm »
Sounds good.  Pics?
Logged
London, England.

45#@28"
Pages: 1 2 3 [4]
« previous next »