« previous next »
Pages: [1]

Author Topic: curly hard maple selfbow  (Read 2349 times)

0 Members and 1 Guest are viewing this topic.

Offline echatham

  • Member
  • Posts: 206
curly hard maple selfbow
« on: December 08, 2013, 01:43:21 pm »
no.... sorry i dont have a picture of one  >:D   will it make a bow?
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: curly hard maple selfbow
« Reply #1 on: December 08, 2013, 02:00:38 pm »
.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline bubby

  • Member
  • Posts: 11,054
Re: curly hard maple selfbow
« Reply #2 on: December 08, 2013, 02:08:25 pm »
The curly in it is a defect in the grain, not good for selfbows or backs, should be ok for a belly lam possibly
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: curly hard maple selfbow
« Reply #3 on: December 08, 2013, 02:14:53 pm »
It Chrystal's. CIA of the zig zag grain orientation
Logged
Nothing ventured nothing gained

Offline echatham

  • Member
  • Posts: 206
Re: curly hard maple selfbow
« Reply #4 on: December 08, 2013, 07:13:45 pm »
Figured as much.  Just a thought.  Thanks guys
Logged

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: curly hard maple selfbow
« Reply #5 on: December 08, 2013, 09:54:25 pm »
If the wood has perfect edge grain then yes you should be able to make it work. If the grain wonders forget it.

VMB
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline portlandfire

  • Member
  • Posts: 166
Re: curly hard maple selfbow
« Reply #6 on: December 08, 2013, 11:24:02 pm »
     Pull out your lathe, and, depending upon the length of your stave, turn a half dozen pepper mills and salt shakers ::)  Or turn a loooonnnng   thin bowl.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: curly hard maple selfbow
« Reply #7 on: December 09, 2013, 12:49:14 am »
Logged

Offline Hamish

  • Member
  • Posts: 1,557
Re: curly hard maple selfbow
« Reply #8 on: December 09, 2013, 03:28:10 am »
Its a risk, you could back it and try. I successfully made a bow from curly grained timber(tropical), backed with boo.It followed the string a fair bit but didn't chrysal. That being said I have had belly slats of the same species chrysal, with wonky grain in  localised spots on other bows.
Logged
Pages: [1]
« previous next »