« previous next »
Pages: [1]

Author Topic: question about bolts  (Read 2643 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
question about bolts
« on: December 01, 2013, 02:04:35 pm »
i got some GREEN podarosa that is tight ringed....should i seal the ends...i havent done this and its more of a project for me...if i asked the same question before SORRY ABOUT THIS...thanks john
Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: question about bolts
« Reply #1 on: December 01, 2013, 11:23:03 pm »
John, I'd treat it just like bow wood. Split the round at least in half and seal the ends. You will get more stable arrows with well seasoned wood so give your billets plenty of time to season.  I guess I'm assuming you are talking about making arrows.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Blacktail

  • Member
  • Posts: 1,432
Re: question about bolts
« Reply #2 on: December 02, 2013, 12:20:24 am »
hey pat,i think i can get some old paint and seal the ends...i just havent herd of people sealing the end of bolts BUT i guess it would be like billets or staves...
Logged

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: question about bolts
« Reply #3 on: December 02, 2013, 01:10:55 am »
John, if the wood is straight grain you could leave them unsealed. They will check but if you are splitting them out you could use those checks to start your splits.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Tom Leemans

  • Member
  • Posts: 524
Re: question about bolts
« Reply #4 on: December 12, 2013, 12:44:30 pm »
Pat always jumps right in there with the best advice. ;)
Logged
Pages: [1]
« previous next »