« previous next »
Pages: 1 [2]

Author Topic: had to finish off a struck deer  (Read 4663 times)

0 Members and 1 Guest are viewing this topic.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: had to finish off a struck deer
« Reply #15 on: December 02, 2013, 07:58:31 pm »
I've had the same results as you OO , Glad you didn't get hurt. 
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: had to finish off a struck deer
« Reply #16 on: December 03, 2013, 01:32:32 am »
Sounds like too many really close calls. I've done the same and had the same, but not to that degree. Send it back to gerber.. They will fix it or replace I t.

Cipriano
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: had to finish off a struck deer
« Reply #17 on: December 03, 2013, 08:28:50 am »
I found a deer hung up in a fence along the roadway once.  I cut a strand of fence to release it, only to realize that it had fought so hard that it's back was broken.  It lounged away, headed over the hill directly toward the interstate dragging itself with front legs only.  I sure didn't want it to cause a traffic accident, so I ran and circled ahead of it.  I had a pocket knife with me, but chose a stout pole instead.  One swift stroke right behind the ears dispatched it cleanly.
Logged
Greg Sulfridge, Lafollette, TN

Offline Marks

  • Member
  • Posts: 673
Re: had to finish off a struck deer
« Reply #18 on: December 03, 2013, 10:17:29 am »
Quote from: Pat B on December 02, 2013, 12:41:36 pm
...as does a Jeep!   ;D

It may have been a jeep that got him in the predicament to start with.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: had to finish off a struck deer
« Reply #19 on: December 03, 2013, 11:00:11 am »
Yeah, difficult situation.  I'm not sure what I would have done.  Dispatching an animal is not as easy as it seems, mentally or physically. Thanks for posting the story.  All of us can learn from it.  :)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: had to finish off a struck deer
« Reply #20 on: December 03, 2013, 12:53:55 pm »
As others have said, I've found that sticking in the chest works much better. I discovered this at the same time that I got hoofprint-shaped bruises on my chest for a week. It's amazing how strong a small deer is when you decide to go hand-to-hoof with it.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline JW_Halverson

  • Member
  • Posts: 11,916
Re: had to finish off a struck deer
« Reply #21 on: December 03, 2013, 09:31:54 pm »
I once tried to snap a half grown fawn's neck Tarzan style after it got hit by a car.  Yeah right.  Never go anywhere without a pocket knife now, at the minimum. 

Sorry about your nice folder, OO.  I bet if you had known ahead of time of the outcome your choice would have been the same. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: had to finish off a struck deer
« Reply #22 on: December 03, 2013, 10:48:58 pm »
Quote from: Marks on December 03, 2013, 10:17:29 am
Quote from: Pat B on December 02, 2013, 12:41:36 pm
...as does a Jeep!   ;D

It may have been a jeep that got him in the predicament to start with.
Not a Jeep that had been sited in. ;)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline seabass

  • Member
  • Posts: 2,267
Re: had to finish off a struck deer
« Reply #23 on: December 04, 2013, 04:23:37 pm »
glad you made it out ok Clint.
Logged
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: had to finish off a struck deer
« Reply #24 on: December 04, 2013, 04:34:56 pm »
Not a scratch Steve, just a broken knife.  Gerber has a lifetime warranty.  I'm going to send it back to them and see what they say.  I hope they repair it and not replace it.  The new style has a different blade and I don't like it as much.  I'm carrying my back up pocket knife now.  Its a Buck Goliath. 
Logged
I started out with nothin' and I still got most of it left

Offline VicNova

  • Member
  • Posts: 238
Re: had to finish off a struck deer
« Reply #25 on: December 05, 2013, 12:05:50 am »
Hey this video gos good with that story https://www.youtube.com/watch?v=gQKhH-5Xlf0.
My father finished off a deer he shot in the back with his knife
« Last Edit: December 05, 2013, 03:03:30 pm by Victor99 »
Logged
Ypsilanti,  Michigan

Offline Parnell

  • Member
  • Posts: 5,556
Re: had to finish off a struck deer
« Reply #26 on: December 05, 2013, 02:05:28 pm »
Tough situation, Clint.  Good for you for doing what's right.  Glad you are ok, buddy.
Logged
1’—>1’

Offline 4dog

  • Member
  • Posts: 1,610
Re: had to finish off a struck deer
« Reply #27 on: December 05, 2013, 02:21:07 pm »
had to do the same thing couple of yrs ago...fawn was struck..broken neck...wasnt fun but in my mind..necassary...did it the same way.
Logged
"SET" is always there !!!

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: had to finish off a struck deer
« Reply #28 on: December 06, 2013, 01:15:32 pm »
It was the right thing to do.

You could fix the knife by taking it apart and making a new handle.  That's what I did with a pocket knife I had once.  Used it for years after till I lost it.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: 1 [2]
« previous next »