« previous next »
Pages: 1 2 [3]

Author Topic: bending oak ??  (Read 10468 times)

0 Members and 1 Guest are viewing this topic.

Offline bushboy

  • Member
  • Posts: 2,256
Re: bending oak ??
« Reply #30 on: November 20, 2013, 04:55:33 pm »
I swear by the localized steam method!in my view because the steam can't ecape as readily it raises the pressure slightly ,therefore the steam carries more btu's(calories of energy) than normal steam!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bubby

  • Member
  • Posts: 11,054
Re: bending oak ??
« Reply #31 on: November 20, 2013, 05:20:34 pm »
that might be why steaming in a microwave works so well
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowSlayer

  • Member
  • Posts: 644
Re: bending oak ??
« Reply #32 on: November 24, 2013, 12:12:41 pm »
Quote from: bubby on November 20, 2013, 05:20:34 pm
that might be why steaming in a microwave works so well

 in a microwave?  :o
Logged
London, England.

45#@28"

Offline bubby

  • Member
  • Posts: 11,054
Re: bending oak ??
« Reply #33 on: November 24, 2013, 02:46:56 pm »
Yea in a microwave
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BowSlayer

  • Member
  • Posts: 644
Re: bending oak ??
« Reply #34 on: November 26, 2013, 03:08:02 pm »
Quote from: bubby on November 24, 2013, 02:46:56 pm
Yea in a microwave

what? how do you fit a bow in the microwave?
Logged
London, England.

45#@28"

Offline Stoker

  • Member
  • Posts: 1,729
Re: bending oak ??
« Reply #35 on: November 26, 2013, 03:39:22 pm »
Quote from: BowSlayer on November 26, 2013, 03:08:02 pm
Quote from: bubby on November 24, 2013, 02:46:56 pm
Yea in a microwave

what? how do you fit a bow in the microwave?

Through a microwave... Cut holes in door and back side.. Don't use your mom's
Logged
Bacon is food DUCT tape - Cipriano

Don Case

  • Guest
Re: bending oak ??
« Reply #36 on: November 26, 2013, 04:00:55 pm »
And don't stand with your groin lined up with the holes :o :o
Logged

Offline J05H

  • Member
  • Posts: 478
Re: bending oak ??
« Reply #37 on: November 26, 2013, 04:33:32 pm »
Quote from: Don C on November 26, 2013, 04:00:55 pm
And don't stand with your groin lined up with the holes :o :o

+1 Bad idea  :( :o
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Stoker

  • Member
  • Posts: 1,729
Re: bending oak ??
« Reply #38 on: November 26, 2013, 05:46:01 pm »
I have a curtain I put over the holes with a damp cloth... It's magnetic energy.. pacemakers not a good idea... DonC thanks for the laugh.. Where else can you bend wood and heat up your pizza??
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano
Pages: 1 2 [3]
« previous next »