Author Topic: A backside handle build up  (Read 5832 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
Re: A backside handle build up
« Reply #15 on: November 13, 2013, 02:35:47 pm »
Hey bubby....you suing for plagiarism?  :laugh:



heck no, I just stole one of your bow layouts, sometimes on these grips I'll wrap it with upholstery thread and then soak that in runny ca glue but its not really necessary and its a pain, this works real good when you have a flat back
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: A backside handle build up
« Reply #16 on: November 13, 2013, 08:18:53 pm »
I do the same with thick veg tanned leather. It really helps a bulbous fit your hand well.

Yup, I think I stole that from you, haha. The veg tan leather works great too, works like wood.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: A backside handle build up
« Reply #17 on: November 13, 2013, 09:14:05 pm »
I like cork for this and also for building up a shelf.  Like Pearly said, it is easy to shape.  Some of the more coarse cork tends to crumble when trying to shape with rasp or blade, but if you saturate it with some thinned wood glue and let it dry for a day, then the same stuff shapes up real nice. 
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline Weylin

  • Member
  • Posts: 2,296
Re: A backside handle build up
« Reply #18 on: November 14, 2013, 12:50:00 am »
I like to build up the back of my handle with a couple layers of rawhide super glued down and then shaped. The cork looks nice too. I should try it some time. I like Carson's cork handles.

Offline Stickhead

  • Administrator
  • Member
  • Posts: 940
Re: A backside handle build up
« Reply #19 on: November 14, 2013, 09:11:18 am »
I've been doing the exact same thing lately on board bows.  Love the cork!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: A backside handle build up
« Reply #20 on: November 14, 2013, 09:19:52 am »
It can crumble if you get after it too hard. It will stay together with light, careful strokes. A layer of TB after the finished shaping isn't a bad plan either.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.