« previous next »
Pages: 1 [2]

Author Topic: Longevity of Pacific Yew  (Read 4221 times)

0 Members and 1 Guest are viewing this topic.

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Longevity of Pacific Yew
« Reply #15 on: November 11, 2013, 05:01:33 pm »
Not much to add.  I agree with what has been said. 

I have found a good thorough heat-treating works great on yew.  However, I am not sure I would temper the belly of an all heartwood bow. 
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline Eric Garza

  • Member
  • Posts: 589
Re: Longevity of Pacific Yew
« Reply #16 on: November 11, 2013, 05:46:21 pm »
Quote
I'm just being nosey ;) but why are you concerned about decay resistance?

I have a theory that decay resistance correlates to resistance to deterioration, so I want to experiment with woods known for their decay resistance to see if they yield bows that shoot well for a very long time.
Logged

Don Case

  • Guest
Re: Longevity of Pacific Yew
« Reply #17 on: November 11, 2013, 06:00:37 pm »
Quote from: Eric on November 11, 2013, 05:46:21 pm

I have a theory that decay resistance correlates to resistance to deterioration, so I want to experiment with woods known for their decay resistance to see if they yield bows that shoot well for a very long time.

Thanks, Sounds interesting.
Don
Logged

Offline Hamish

  • Member
  • Posts: 1,549
Re: Longevity of Pacific Yew
« Reply #18 on: November 11, 2013, 06:27:14 pm »
A bit of heat treating works really well on yew. I wouldn't toast it, do enough to put in a little reflex and it will be a rocket launcher. Don't bend it for at least a week after heat treating, 2 would be even better.
Logged

Offline Eric Garza

  • Member
  • Posts: 589
Re: Longevity of Pacific Yew
« Reply #19 on: November 11, 2013, 09:37:56 pm »
My goal is to source a ~60 inch stave and turn it into an all heartwood, sinew backed deflex-reflex paddle bow. I've been really into paddle bows for the last couple years.
Logged
Pages: 1 [2]
« previous next »