« previous next »
Pages: [1]

Author Topic: Best bottle bottom so far(SECOND ATTEMPT)  (Read 1493 times)

0 Members and 1 Guest are viewing this topic.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Best bottle bottom so far(SECOND ATTEMPT)
« on: November 08, 2013, 03:49:30 pm »
Ive been having a hard time with the convex/concave of bottle bottoms and I came so close to getting the convex out of this one. I know how to do it know though so the next one should be a lot better.







I did way better on this one and happy with how it came out.



« Last Edit: November 08, 2013, 08:08:52 pm by BOWMAN53 »
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Best bottle bottom so far
« Reply #1 on: November 08, 2013, 07:06:37 pm »
looking good jordo, keep chipping away at it, bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #2 on: November 08, 2013, 08:25:36 pm »
thanks bub, the second one came out better but i missed a few stops on the convexed side
Logged

Offline Mike_H

  • Member
  • Posts: 323
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #3 on: November 08, 2013, 09:14:48 pm »
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #4 on: November 08, 2013, 10:16:18 pm »
Looking good Jordan.
Logged

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #5 on: November 09, 2013, 03:45:28 am »
Logged

Offline Mike_H

  • Member
  • Posts: 323
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #6 on: November 09, 2013, 10:26:56 am »
No problem bowman, that page helped me plenty when I started.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #7 on: November 10, 2013, 12:06:07 am »
Put a sharper point on it and stick it on a stick :D Looks darn good to me.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #8 on: November 10, 2013, 12:11:46 am »
Thanks eddie,  learning how to make arrows is the next thing on my todo list.
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #9 on: November 10, 2013, 07:34:24 am »
Your well on your way! Knap on.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #10 on: November 10, 2013, 05:00:54 pm »
Looks good  enough to me to kill a critter and for hafting iv been using hot glue it works great if you dont have pitch or other primitive glues ;). It takes practice on bottle bottoms to get the concavity  out i always work the concave side flat then over shoot  the convex side to match ;) watch paleomanjims youtube vids he show how to do that with pressure ;)
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Best bottle bottom so far(SECOND ATTEMPT)
« Reply #11 on: November 10, 2013, 05:49:13 pm »
Quote from: skyarrow on November 10, 2013, 05:00:54 pm
Looks good  enough to me to kill a critter and for hafting iv been using hot glue it works great if you dont have pitch or other primitive glues ;). It takes practice on bottle bottoms to get the concavity  out i always work the concave side flat then over shoot  the convex side to match ;) watch paleomanjims youtube vids he show how to do that with pressure ;)

I've watched just about every vid on bottle bottoms lol the one that billy did is the best one imo.
Logged
Pages: [1]
« previous next »