« previous next »
Pages: [1]

Author Topic: Hafting Question  (Read 2752 times)

0 Members and 1 Guest are viewing this topic.

Offline knapperhead

  • Member
  • Posts: 161
Hafting Question
« on: November 02, 2013, 11:30:15 am »
I am going to haft some stone points on my home depot bamboo shafts. Should I insert a dowel first? Also, should the notch for the point line up with the nock ? Thanks,
Matt
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: Hafting Question
« Reply #1 on: November 02, 2013, 12:21:38 pm »
I do not insert a dowel on mine-most of the dowel would be lost in carving the notch.
I make the notch for the head perpendicular to the string nock so that when the arrow flexes back and forth during paradox, it will not "catch" the wind- that is it will fly straighter.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline knapperhead

  • Member
  • Posts: 161
Re: Hafting Question
« Reply #2 on: November 02, 2013, 12:41:10 pm »
Thanks Aaron  8)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,634
Re: Hafting Question
« Reply #3 on: November 02, 2013, 01:20:10 pm »
I haft stone and trade points right into the shafting without foreshafts. I usually cut the nock and point slots the same direction.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline knapperhead

  • Member
  • Posts: 161
Re: Hafting Question
« Reply #4 on: November 02, 2013, 08:36:37 pm »
Almost ready to haft and then I blew the corner off


Logged

Offline papoints

  • Member
  • Posts: 153
Re: Hafting Question
« Reply #5 on: November 02, 2013, 08:59:35 pm »
Superglue my friend the deer won't notice :).
Logged
Pages: [1]
« previous next »