Need ideas for an arrow rack

[Buckeye Guy]

Hey Clint
The same volume of Popular Mechanics do it yourself encyclopedia (1955)that has that cool bandsaw from pluming parts ! Has a cool case for caring archery gear , holds 2 doz arrows and all the other goodies !!It would go well with  to the bench you  made !
Wish I knew how to find it on line for you !

[Pat B]

Was it called an Asherum(sp), Guy? They were popular during Victorian times and was named for Roger Asherum.

[Davesea]

Good idea I like it Davesea.  Quite a bit of drilling to make it and use more material, just my 2 cents worth.

Bow101, it requires drilling 24 holes for 24 arrows.  Then rip through middle of holes to make the top and bottom half circle holders.  I can calculate the square inches of material used if you would do the same and we can compare.

[Buckeye Guy]

Pat
They just referred to them as "archers kit" , I knew there had to be a different name for them ! Thanks for letting me know it !

[bowtarist]

In Maurice Thompson's book "The Witchery of Archery" they call what PatB is talking about an "Ascham" and it is used like a gun case. but for your bow and tackle.  Is this the same thing that you are talking about Guy?  dp

[Buckeye Guy]

Bowtarist
Yes it is a carry case for all the goodies except the bow !
Guy

[bow101]

Good idea I like it Davesea.  Quite a bit of drilling to make it and use more material, just my 2 cents worth.

Bow101, it requires drilling 24 holes for 24 arrows.  Then rip through middle of holes to make the top and bottom half circle holders.  I can calculate the square inches of material used if you would do the same and we can compare.

I allready figured out, rip through the middle part;  But it looks like the bottom has divets in it..?

[Davesea]

Good idea I like it Davesea.  Quite a bit of drilling to make it and use more material, just my 2 cents worth.

Bow101, it requires drilling 24 holes for 24 arrows.  Then rip through middle of holes to make the top and bottom half circle holders.  I can calculate the square inches of material used if you would do the same and we can compare.

I allready figured out, rip through the middle part;  But it looks like the bottom has divets in it..?

Ya, bottom has divots so that would require some drilling.