« previous next »
Pages: [1]

Author Topic: Osage stave  (Read 3975 times)

0 Members and 1 Guest are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
Osage stave
« on: September 20, 2013, 01:43:14 pm »
Howdy all. I'm looking for a clean osage stave. 64" long would do it. 2" wide. I'm looking to make a 62" recurve. I have oodles to trade... stone heads, sinew, rawhide, finished arrows, cedar shafts, wood lams, backing strips... think something up, I probably have it.
Logged

Offline wildman

  • Member
  • Posts: 863
Re: Osage stave
« Reply #1 on: September 20, 2013, 10:13:41 pm »
Send me your email. I have some clean osage I will send ya some pics. Do you have any 60-70lb spines?
Logged
" Society your crazy greed , hope your not lonely without me"

-Eddie Vedder-

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #2 on: September 22, 2013, 11:42:26 am »
PM sent. Thanks.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #3 on: September 24, 2013, 10:15:05 am »
Nothing yet.  :( Doesn't somebody have an osage stave for a bowyer who lives in a bow wood desert?
Logged

Offline k-hat

  • Member
  • Posts: 1,058
Re: Osage stave
« Reply #4 on: September 27, 2013, 12:07:08 am »
billets ok?  My cleanest osage is in billet form.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #5 on: September 27, 2013, 12:19:42 am »
Yes... billets would work.
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Osage stave
« Reply #6 on: September 27, 2013, 12:29:30 am »
adb, let me take a couple pics in the morning. If I don't have what you're looking for I'll get in touch with my bestest supplier over east of here on the Missouri River area. He does have a nice set of billets that I know of for sure ( I was thinking of trying to purchase them and more because I have a some urac that needs to be used up in a very short time).
I have a couple three long enough but not as wide as you're looking for.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline k-hat

  • Member
  • Posts: 1,058
Re: Osage stave
« Reply #7 on: September 30, 2013, 01:06:36 am »
Here's my best billets at the moment:

They are seasoned and ready to work. 

The top one in the pic is actually a half that needs split to make sisters, should be plenty of wood there.  The other two below are sisters, a touch of character that can easily be heated out.  They do have a bit of crown.  They are all about 38" long.






This is one end of the top one.  There is a pin knot right there where i cut it, but it's not going to affect anything, probly the tip and and will be cut off. 


Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #8 on: October 03, 2013, 12:46:22 pm »
Pearl Drums to the rescue! Thanks, Chris! A fine looking stick of yeller wood is on the way towards me.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Osage stave
« Reply #9 on: October 03, 2013, 05:01:06 pm »
Quote from: adb on September 24, 2013, 10:15:05 am
Nothing yet.  :( Doesn't somebody have an osage stave for a bowyer who lives in a bow wood desert?

I would of hooked you up, but I haven't been able to cut a thing this year, due to vehicle problems.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #10 on: October 03, 2013, 11:47:17 pm »
I'm open to osage staves anytime. If you cut some and want to unload any, think of me! None where I live, or much in the way of bow wood I can cut myself.  :(
Logged

Offline k-hat

  • Member
  • Posts: 1,058
Re: Osage stave
« Reply #11 on: October 04, 2013, 03:58:13 pm »
Pearlie's the man!
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage stave
« Reply #12 on: October 04, 2013, 07:16:27 pm »
Logged
Pages: [1]
« previous next »