« previous next »
Pages: [1] 2

Author Topic: Knot in Osage  (Read 7216 times)

0 Members and 2 Guests are viewing this topic.

Offline Joec123able

  • Member
  • Posts: 1,769
Knot in Osage
« on: October 02, 2013, 10:27:54 pm »
So I have this Osage stave one of the cleanest Osage staves I've ever seen EXCEPT one nasty large knot right near the the handle fade will be I couldn't even get the knot to one growth ring so I don't know what the heck to do the knot ends right where the fade will end what do you guys think I outta do ? I don't know If I should rasp as much of the knot away as possible or what

Logged
I like osage

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Knot in Osage
« Reply #1 on: October 02, 2013, 10:39:39 pm »
Just my opinion and I'm new. But that's awesome. I'd leave it. It looks like a non working part of the handle. It's almost a small burl it looks like. Bet u wouldn't see another bow like it.
Logged
Nothing ventured nothing gained

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Knot in Osage
« Reply #2 on: October 02, 2013, 10:42:44 pm »
I'd also do my best to include that in a static part of the bow, personally, but be sure not to let it work too much.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #3 on: October 02, 2013, 10:47:22 pm »
 I don't think it's gonna be working its right where the fade will be
Logged
I like osage

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Knot in Osage
« Reply #4 on: October 02, 2013, 10:48:56 pm »
I wouldn't rasp it away.  Leave it proud, just sand it real pretty.  If it's not bending there you should be ok.  I have one with a similar issue and I did rasp it away, but only because it was punky wood all the way thru to the belly.  Filled with epoxy and never a problem.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline DavidV

  • Member
  • Posts: 472
Re: Knot in Osage
« Reply #5 on: October 02, 2013, 10:49:27 pm »
I would cut the shelf in on the other side just because it would make me nervous with that knot. Looks okay as long as it doesn't bend.
Logged
Springfield, MO

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #6 on: October 02, 2013, 10:52:04 pm »
Alright guys then I will move the shelf to the other side and try to keep it on the bottom fade
Logged
I like osage

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #7 on: October 02, 2013, 10:55:58 pm »
I also have alittle straightening to do on this stave too but shouldn't be a problem atleast I hope knot   8)

Logged
I like osage

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Knot in Osage
« Reply #8 on: October 02, 2013, 11:07:59 pm »
Is the bow at sideway brace? Lol that's a boomerang.
Logged
Nothing ventured nothing gained

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Knot in Osage
« Reply #9 on: October 02, 2013, 11:09:52 pm »
You and I define "clean" differently.  Good luck with it.  :)
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #10 on: October 02, 2013, 11:11:21 pm »
When I say clean I mean no knots or anything but hey that curve isn't as bad as it looks most of the stave is pretty straight just towards the end of one limb it bends off to the side .... Nothing alittle steam can't fix
Logged
I like osage

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Knot in Osage
« Reply #11 on: October 02, 2013, 11:26:49 pm »
It looks like a 45 degree angle
Logged
Nothing ventured nothing gained

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #12 on: October 02, 2013, 11:34:00 pm »
Quote from: Blaflair2 on October 02, 2013, 11:26:49 pm
It looks like a 45 degree angle

Not quite
Logged
I like osage

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Knot in Osage
« Reply #13 on: October 02, 2013, 11:34:26 pm »
Do you have enough length to move your handle layout to where the knot would be in the handle instead of the fade?  I would center it in the handle if it were mine and had the length to do it.
Logged
I started out with nothin' and I still got most of it left

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Knot in Osage
« Reply #14 on: October 02, 2013, 11:36:51 pm »
Quote from: osage outlaw on October 02, 2013, 11:34:26 pm
Do you have enough length to move your handle layout to where the knot would be in the handle instead of the fade?  I would center it in the handle if it were mine and had the length to do it.

I was gonna do that but then the bow would only be 60 inchs long
Logged
I like osage
Pages: [1] 2
« previous next »