« previous next »
Pages: 1 ... 18 19 [20] 21 22 ... 29

Author Topic: '13 XMAS TRADE WORKS IN PROGRESS  (Read 91570 times)

0 Members and 3 Guests are viewing this topic.

Offline 4dog

  • Member
  • Posts: 1,610
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #285 on: December 19, 2013, 07:02:52 pm »
shipped and pm'ed wed
Logged
"SET" is always there !!!

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #286 on: December 19, 2013, 09:09:36 pm »
welp im going to have to scrap plan A and start on plan B, Time to make a bone knife!
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline Accipiter

  • Member
  • Posts: 246
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #287 on: December 19, 2013, 11:42:02 pm »


Didn't make the blade, but I'm pretty happy with how the handle turned out. Time to load it up with some other goodies and get it in the mail!
Logged

Offline Rick Wallace

  • Member
  • Posts: 766
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #288 on: December 19, 2013, 11:44:13 pm »
Wow look at that!  Nice knife!
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #289 on: December 19, 2013, 11:48:48 pm »
Great job.  I just got my handle shaped last night and the finish is now good to go.  Time to make a sheath.  I'll get on that tomorrow :)
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #290 on: December 20, 2013, 04:10:19 am »
Nice knife, Reminds me of a mora
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Stoker

  • Member
  • Posts: 1,729
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #291 on: December 20, 2013, 11:02:31 am »
Got to put on some finishing touches.. Load up with some other goodies... Off to the P/O...
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline autologus

  • Member
  • Posts: 1,092
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #292 on: December 20, 2013, 11:45:50 am »
There is a lot of nice gifts being made.  Here is one of my gifts in progress, I still have some more work to do on it and then on two #2.

Grady

Logged
Proud Hillbilly from Arkansas.

Offline skarhand

  • Member
  • Posts: 180
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #293 on: December 20, 2013, 12:34:49 pm »
SHIPPED!! Woohoo....now I wait.  ;D



(PM on its way to Bubby)
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #294 on: December 20, 2013, 01:00:00 pm »
So my original plan all went to shit and I still haven't received the blade I had made. Luckily I'm used to my shitty luck and had a plan b, when that didn't work out I had plan c, then d and so on. Well I'm on plan w now and it's almost done. I'll put some pix when I get everything done up. I made a 4 1/2" two finger skinner from a surgical steel blade I had made awhile ago. Almost a neck knife. More for display. But is still very sharp and functional. Hopefully my guy likes it
Logged
Nothing ventured nothing gained

Offline bubby

  • Member
  • Posts: 11,054
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #295 on: December 20, 2013, 02:49:25 pm »
you definattly got my attention scarhand :laugh:
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline skarhand

  • Member
  • Posts: 180
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #296 on: December 20, 2013, 02:52:47 pm »
Quote from: bubby on December 20, 2013, 02:49:25 pm
you definattly got my attention scarhand :laugh:

That is because I am scared of ending up on the naughty list, LOL.
Logged

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #297 on: December 20, 2013, 08:45:42 pm »
ok heres my gift, it headed south on tuesday. the knife is forged from 5160 spring steel with walnut scales and brass pins, the striker is forged from a piece of dump rake tooth.
Logged
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #298 on: December 20, 2013, 09:06:00 pm »
Saweeeet! I have a 4' piece of jackhammer bit. Is that good to forge?
Logged
Nothing ventured nothing gained

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: '13 XMAS TRADE WORKS IN PROGRESS
« Reply #299 on: December 20, 2013, 11:07:15 pm »
jack bits are usually d-7 tool steel which is a super tough steel but a pain in the butt to forge unless you've got a power hammer, it's especialy good for tools like punches, hot cutters and hardies.
Logged
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"
Pages: 1 ... 18 19 [20] 21 22 ... 29
« previous next »