« previous next »
Pages: [1]

Author Topic: Some newbies  (Read 1920 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Some newbies
« on: September 24, 2013, 01:28:24 am »
D-Fir arrows, 11/32"  29" target points. I have to do my fletching better.. ???  These arrows are almost dead arse straight,  >:D   They were made from square stock.
« Last Edit: September 24, 2013, 01:54:09 am by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: Some newbies
« Reply #1 on: September 24, 2013, 09:09:06 am »
Good on ya for making your own, that's what it's all about. How do they fly?
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline bow101

  • Member
  • Posts: 2,235
Re: Some newbies
« Reply #2 on: September 24, 2013, 12:41:23 pm »
Thanks, like I said my fletching work needs improvement, have to make a proper fletch tool so they are put on either straight or properly spiraled.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Some newbies
« Reply #3 on: September 25, 2013, 01:34:55 pm »
Those look pretty good.  Do they shoot well?  How long are the feathers?
Logged
Aim Small...Hit Small

Offline bow101

  • Member
  • Posts: 2,235
Re: Some newbies
« Reply #4 on: September 26, 2013, 11:53:05 pm »
The shoot ok, all I know is that my second shot with a new bow at 12 yards got me bulls eye.  125 grain target point tips. 5" store bought fletching.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Some newbies
« Reply #5 on: September 27, 2013, 12:15:16 am »
Did you seal those shafts yet? I'm impressed that you made them from square stock. Your fletching will get better as you go. Now you just need to put white paint under those shiny nocks to make them show up brighter or better yet cut self nocks and reinforce them with sinew. You can still paint them your favorite color florescent if you need it for visibility. Just remember that a 29" bop arrow with glue on nocks is 28 1/2" before adding the nock and with self nocks the shaft needs to be
29 1/2" before cutting in the nock.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline bow101

  • Member
  • Posts: 2,235
Re: Some newbies
« Reply #6 on: September 27, 2013, 12:53:21 pm »
Sealed with 2 coats of clear.  i have a jig that I made for turning the sqaure stock into round shafts. Easy peasy......i have cut self nocks and reinforced them, but had a hard time on the smaller 11/32 shafts so I used plastic nocks.
« Last Edit: September 27, 2013, 12:56:44 pm by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bow101

  • Member
  • Posts: 2,235
Re: Some newbies
« Reply #7 on: September 27, 2013, 01:01:33 pm »
Here is one pic with a few self nocked.  Made a couple flu-flu's as well with feathers.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell
Pages: [1]
« previous next »