« previous next »
Pages: [1]

Author Topic: Laminated Bows  (Read 1570 times)

0 Members and 1 Guest are viewing this topic.

Offline Mad Max

  • Member
  • Posts: 480
Laminated Bows
« on: October 20, 2013, 11:29:21 am »
I laminated a bow with Titebond 3     4 lams
i am' going to give it a couple of days before i take it out of the form.
How long do i need to wait before i can tiller it????????????
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

mikekeswick

  • Guest
Re: Laminated Bows
« Reply #1 on: October 20, 2013, 12:27:41 pm »
It depends on the temperature it's been kept in since glue-up. 24 hours should be enough.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Laminated Bows
« Reply #2 on: October 20, 2013, 12:29:22 pm »
After a couple of days should be enough time. What did you use to clamp the glue-up?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mad Max

  • Member
  • Posts: 480
Re: Laminated Bows
« Reply #3 on: October 20, 2013, 12:52:36 pm »
Quote from: Pat B on October 20, 2013, 12:29:22 pm
After a couple of days should be enough time. What did you use to clamp the glue-up?
I used c clamps and mostly tire tubes

Mike it's been in the high 50s in the morning and high 70s in the day
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Laminated Bows
« Reply #4 on: October 20, 2013, 01:34:25 pm »
You should be okay. Rubber tubes are better then the clamps. You don't want to squeeze all of the glue out with TB.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: [1]
« previous next »