« previous next »
Pages: [1]

Author Topic: Heat treating  (Read 2198 times)

0 Members and 1 Guest are viewing this topic.

Offline Mad Max

  • Member
  • Posts: 480
Heat treating
« on: October 03, 2013, 11:43:08 pm »
when is the best time to heat treat the belly?
ruffed stave? half tillered? finished?


I did a search.  Is there a "How to" on heat treating
Thanks
Logged
I would rather fail trying to do something above my means, Than to succeed at something beneath my means.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Heat treating
« Reply #1 on: October 04, 2013, 01:24:57 am »
I heat treat the rough stave, the low brace, the full brace, and the finished bow in both Black Locust and Vine Maple.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Heat treating
« Reply #2 on: October 04, 2013, 01:36:38 am »
Quote from: huisme on October 04, 2013, 01:24:57 am
I heat treat the rough stave, the low brace, the full brace, and the finished bow in both Black Locust and Vine Maple.

Yep thts the best way to do it
Logged
I like osage

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Heat treating
« Reply #3 on: October 04, 2013, 01:44:57 am »
Max, Marc St Louis wrote a chapter in TBBIV on heat treating. Marc popularized this technique with his high performance, highly reflexed, heat treated whitewood selfbows. You'll get lots of good info and techniques from Marc's chapter then you can taylor that to your needs.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

mikekeswick

  • Guest
Re: Heat treating
« Reply #4 on: October 04, 2013, 02:23:37 am »
Yep TBB 4.
Marc's chapter is excellent and will tell you all you need to know.
Logged
Pages: [1]
« previous next »