« previous next »
Pages: [1]

Author Topic: Tiller Advice  (Read 1805 times)

0 Members and 1 Guest are viewing this topic.

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Tiller Advice
« on: September 12, 2013, 10:10:27 pm »
This one's 65" ntn, serviceberry sapling, lightly heat treated, 65#@25". 2" string follow at biggest dip, started with 1 inch of deflex at same place. I think it should bend a little more in the outer limbs, what do you guys think?





Logged
The secret of life is learning to make your own luck.

Offline Weylin

  • Member
  • Posts: 2,296
Re: Tiller Advice
« Reply #1 on: September 12, 2013, 10:20:00 pm »
Looks fine to me. With 65" ntn, some deflex and a 25 inch draw I don't think you're in much danger with that one.  ;)
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Tiller Advice
« Reply #2 on: September 12, 2013, 10:28:25 pm »
I agree wit your assessment... I'd get it bending more in outer third. Especially top limb.
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Tiller Advice
« Reply #3 on: September 12, 2013, 10:42:38 pm »
I think it's fine. The outer limbs only look stiff because of the original limb shapes.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tiller Advice
« Reply #4 on: September 12, 2013, 11:50:49 pm »
The outer limbs could come around a bit more, especially the top like adb suggested.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Tiller Advice
« Reply #5 on: September 12, 2013, 11:54:22 pm »
K thanks for the confirmation, i think i might pike it a bit since it's a little longer than is practical for me. Would doing a light toasting pose any threat at this point? haven't shot it or bent it too much yet.
Logged
The secret of life is learning to make your own luck.

mikekeswick

  • Guest
Re: Tiller Advice
« Reply #6 on: September 13, 2013, 03:00:09 am »
No but try to do any heat treating before any set shows up.
Both outer limbs need to come round a little.
Also use set to tell you what's happening. Where it's too strained etc.
Logged

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Tiller Advice
« Reply #7 on: September 13, 2013, 07:46:35 pm »
Thanks mike, the set situation seems to be fine. Ill correct the tiller and treat and he see how it goes.
Logged
The secret of life is learning to make your own luck.
Pages: [1]
« previous next »