« previous next »
Pages: [1]

Author Topic: TBIII removal  (Read 1230 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
TBIII removal
« on: August 25, 2013, 03:48:23 am »
I have an osage bow I'm working on now and am nearing completion.  When I recieved the stave, it was covered in tbIII to prevent checking. I decided to leave the sapwood on because I like its looks. How to I get the glue off? Scraping it is a pita.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Joec123able

  • Member
  • Posts: 1,769
Re: TBIII removal
« Reply #1 on: August 25, 2013, 05:48:45 am »
Are the rings violated ? If so your gonna have to chase a ring Anyways and the glue won't be a big deal by the way I like the idea of leaving the sap wood on I'd do sap wood back heartwood belly seems like everyone's afraid to use sapwood Osage for what ever reason. the sap wood works good too, I've used the sapwood once worked fine
Logged
I like osage

Offline sleek

  • Member
  • Posts: 6,764
Re: TBIII removal
« Reply #2 on: August 25, 2013, 05:55:14 am »
Actually the back is fine and the bow is tillered out to 39@28. Darn that last pound....
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: TBIII removal
« Reply #3 on: August 25, 2013, 12:09:13 pm »
Have you tried heating the TBIII. It will degrade at 150deg so it should soften enough to remove it with the use of a heatgun.  Other than that scraping or sanding would be the other option.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »