« previous next »
Pages: [1]

Author Topic: state arrow regulations for arrow exchange.  (Read 3674 times)

0 Members and 1 Guest are viewing this topic.

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
state arrow regulations for arrow exchange.
« on: August 20, 2013, 02:14:51 am »
if there are any special regulations for arrows in your state, please post them here.
Logged
smoky, Bassett NE

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: state arrow regulations for arrow exchange.
« Reply #1 on: August 20, 2013, 08:29:47 am »
If its a hunting head in my state, Illinois, stone or steel minimum width is 7/8"
Logged
I ain't broke but I'm badly bent.

Offline autologus

  • Member
  • Posts: 1,092
Re: state arrow regulations for arrow exchange.
« Reply #2 on: August 20, 2013, 09:31:42 am »
Arkansas requires a minimum width of 7/8" any material no other restrictions.  Oh and no poison so don't poison my arrow.  ;D

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: state arrow regulations for arrow exchange.
« Reply #3 on: August 20, 2013, 09:53:15 am »
Nebraska: •
Arrows or spears must have a sharpened hunting
head with a blade of at least 7/16-inch cutting radius
from the center of the arrow shaft. Arrows or spears
containing poison, stupefying chemical or having an
explosive tip are illegal
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline artcher1

  • Member
  • Posts: 1,114
Re: state arrow regulations for arrow exchange.
« Reply #4 on: August 20, 2013, 10:35:42 am »
Minimum is 3/4" in WV..........Art B
Logged

Offline Ed Brooks

  • Member
  • Posts: 1,020
Re: state arrow regulations for arrow exchange.
« Reply #5 on: August 20, 2013, 11:01:01 am »
Hunting head in WA is 7/8" wide.
Logged
It's in my blood...

Centralia WA,

Offline warpath

  • Member
  • Posts: 365
Re: state arrow regulations for arrow exchange.
« Reply #6 on: August 20, 2013, 11:15:02 am »
In N.J. minimum of 1" cutting diameter. Steel only!!! :(

  G
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: state arrow regulations for arrow exchange.
« Reply #7 on: August 20, 2013, 10:50:32 pm »
PA 7/8" cutting edge.
Logged

Offline TRACY

  • Member
  • Posts: 4,523
Re: state arrow regulations for arrow exchange.
« Reply #8 on: August 20, 2013, 10:59:14 pm »
Metal edged, flint or obsidian with no minimum width or length in Indiana.

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: state arrow regulations for arrow exchange.
« Reply #9 on: August 20, 2013, 11:20:12 pm »
7/8's here in Florida, but I've never had anyone with a tape measure wanting to use it when you dragged something in dead.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: state arrow regulations for arrow exchange.
« Reply #10 on: August 20, 2013, 11:29:00 pm »
3/4" in ohio. No poison or explosives.
Logged
Steve Bennett

Offline Grandpa Bill

  • Member
  • Posts: 19
Re: state arrow regulations for arrow exchange.
« Reply #11 on: August 22, 2013, 10:48:08 pm »
7/8th of an inch in California
Logged
Aim Small - Hit Small - Repeat

Offline madcrow

  • Member
  • Posts: 1,531
  • Swift, Silent, and covered in wood shavings.
Re: state arrow regulations for arrow exchange.
« Reply #12 on: August 22, 2013, 11:27:12 pm »
NC, steel or stone, 7/8" wide.  No barbs, unless they are shallow notches that can be filled up with sinew. ::)
Logged
Pages: [1]
« previous next »