Author Topic: Three fingers under  (Read 5257 times)

0 Members and 1 Guest are viewing this topic.

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Three fingers under
« Reply #15 on: August 20, 2013, 08:54:45 pm »
Take the bow and put it on a tiller tree.....put tape (or knocking point) on string, before hand using your fingers to locate where the knocking point would be, and you decide. I have seen people use equal limbs as opposed to a longer upper limb.....choice, and feel is what keeps me there. :)

VMB
Debating is an intellectual exchange of differing views...with no winners.

Offline tallpine

  • Member
  • Posts: 183
  • East Texas
Re: Three fingers under
« Reply #16 on: August 20, 2013, 09:25:32 pm »
I did do this VMB. I made a fixture out of heavy leather that was the width of my 3 fingers, I positioned it on the tiller tree and tried to simulate as close as possible a 3 finger draw, There was no visible difference in tiller vs. pulling it with my regular tillering snap.   This is just my opinion and experience, others may have different results,> Dan

Offline adb

  • Member
  • Posts: 5,339
Re: Three fingers under
« Reply #17 on: August 21, 2013, 01:07:14 am »
Thanks, Guys. This is the kind of stuff I'm looking for.