« previous next »
Pages: [1]

Author Topic: Smooth out nipples on back  (Read 3283 times)

0 Members and 1 Guest are viewing this topic.

Offline Stefan

  • Member
  • Posts: 167
Smooth out nipples on back
« on: August 19, 2013, 03:59:45 pm »
Hi all,

I have this maple stave roughed out. I want to steam is and add some recurve. Currently the bow has some pin knots (I call them nipples since seeing that 6 nipples bow of Druid)

How much of the nipples can you scrape? Some are damaged and if I want to add recurve those nipples are in the way. Is it dangerous to scrape them too much (like nodes on bamboo, prone to splinter or fail)??

I have added some pics. Lately I also have been woodturning. Just wanna showed my work. I have made handles for rasp I paid like $2 for @ a flea market. The handle on the end of the rasp is exchangable. The nicholson rasp works very good  :D

Greetings,

Stefan
Logged
Iron rusts from disuse, water loses its purity from stagnation... even so does inaction sap the vigor of the mind.

Leonardo

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Smooth out nipples on back
« Reply #1 on: August 19, 2013, 04:08:55 pm »
Don't scrape down the nipples of that lady, they are just beautiful! And this can cause a problem too!

Use some thin slats in the right dimensions for lifting the stave while recurving.

Nice handles too!

Are you also German?
Logged
Simon
Bavaria, Germany

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Smooth out nipples on back
« Reply #2 on: August 19, 2013, 04:10:23 pm »
Im German!

I LIGHTLY sand those nipps, just enough to not snag anything. As Simon said, it can cause problems if you take much off them.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Weylin

  • Member
  • Posts: 2,296
Re: Smooth out nipples on back
« Reply #3 on: August 19, 2013, 04:29:23 pm »
Sounds like you should see a doctor about that problem!  >:D
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Smooth out nipples on back
« Reply #4 on: August 19, 2013, 04:30:50 pm »
Quote from: PEARL DRUMS on August 19, 2013, 04:10:23 pm
Im German!

I LIGHTLY sand those nipps, just enough to not snag anything. As Simon said, it can cause problems if you take much off them.

I do the same as Pearly.  I'll hit them with sandpaper and smooth them out a little.
Logged
I started out with nothin' and I still got most of it left

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Smooth out nipples on back
« Reply #5 on: August 19, 2013, 04:36:41 pm »
after you sand them, put a ring of stain around them lol
Logged

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Smooth out nipples on back
« Reply #6 on: August 19, 2013, 04:46:29 pm »
All I saw was nipples. Couldn't not look yah know?

Like they said sand em smooth
Logged
Clatskanie, Oregon

Offline Stefan

  • Member
  • Posts: 167
Re: Smooth out nipples on back
« Reply #7 on: August 19, 2013, 05:40:31 pm »
Thanks for the advice,

@ Simon, I am dutch not german. Why did you think is was german?
 
I will sand the smooth(er) and post the result if this stave want to be a bow

Stefan
Logged
Iron rusts from disuse, water loses its purity from stagnation... even so does inaction sap the vigor of the mind.

Leonardo

Offline danny f

  • Member
  • Posts: 656
Re: Smooth out nipples on back
« Reply #8 on: August 19, 2013, 06:42:23 pm »
i wouldnt touch them,  my trade bows just cracked where i had sanded over some bumps.
Logged
Pages: [1]
« previous next »