« previous next »
Pages: [1]

Author Topic: Stave experts  (Read 2075 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Stave experts
« on: August 09, 2013, 10:12:16 pm »
Like I said before photos are kind of tough doing..! So I have this 4-5 inch Hawthorn log it has 3 small knots near one end. It has a larger knot near the center.  How should I split it..?  As shown in the pic or flip it 90 degrees.?  ???
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Stave experts
« Reply #1 on: August 09, 2013, 10:48:27 pm »
Personally I'd rotate it. U may avoid the knots. I'm new to bow making but I've split a lot of logs and milled small boards with my table saw.
Logged
Nothing ventured nothing gained

Offline sleek

  • Member
  • Posts: 6,743
Re: Stave experts
« Reply #2 on: August 10, 2013, 12:21:02 am »
I would do it the way you got it drawn and then splice the thick ends together for the handle. How long is it? Howevr, it may not make a difference in the world how you do it. Probably can make a bow either way, just try to keep the knots off the sides of the bow.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Stave experts
« Reply #3 on: August 10, 2013, 02:32:42 am »
I just hope all goes well for ya splitting the hawthorn, it can be pretty darn tough to split, at least mine is, good luck.
Logged
The secret of life is learning to make your own luck.

Offline dwardo

  • Member
  • Posts: 1,456
Re: Stave experts
« Reply #4 on: August 10, 2013, 03:46:20 am »
I have tried to split hawthorne twice and both times disaster.
Never had a problem splitting any other wood before.
I would saw it if you can.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Stave experts
« Reply #5 on: August 10, 2013, 04:48:39 am »
One of the big advantages of sawing is that you can saw through the worst knots, they then dissapear off the edge of the stave once it's roughed out.
Splitting can/will wander off round the knots.
Splitting is more primitive quicker, more fun, but I save it for easilly obtainable wood that splits well like Hazel and Ash
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bow101

  • Member
  • Posts: 2,235
Re: Stave experts
« Reply #6 on: August 10, 2013, 02:59:04 pm »
Quote from: sleek on August 10, 2013, 12:21:02 am
I would do it the way you got it drawn and then splice the thick ends together for the handle. How long is it? Howevr, it may not make a difference in the world how you do it. Probably can make a bow either way, just try to keep the knots off the sides of the bow.

Its 74" .. Only thing I have no tools for doing a proper splice.. ::)  Probably go with what others say and that is to cut it, instead of splitting it.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline dbb

  • Member
  • Posts: 745
Re: Stave experts
« Reply #7 on: August 10, 2013, 11:14:48 pm »
You dont need much to make a splice,i made a pretty good one with a cheap fine toothed japanese saw.
Just be careful and take your time.
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline bow101

  • Member
  • Posts: 2,235
Re: Stave experts
« Reply #8 on: August 10, 2013, 11:27:57 pm »
Lol....... broke almost every tooth in my Lee Valley japanese saw.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Stave experts
« Reply #9 on: August 11, 2013, 12:05:39 am »
I'd just split it and make a bow knots usually aren't a problem
Logged
I like osage

Offline BowSlayer

  • Member
  • Posts: 644
Re: Stave experts
« Reply #10 on: August 11, 2013, 04:19:08 am »
I recently got a stave with a few knots in it that im going to try and make into a bow. My advice is keep the three small knots on the centre of the middle of the limbs and not of to one side
Logged
London, England.

45#@28"
Pages: [1]
« previous next »