« previous next »
Pages: [1]

Author Topic: glue for lamination  (Read 1008 times)

0 Members and 1 Guest are viewing this topic.

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
glue for lamination
« on: August 07, 2013, 01:53:41 pm »
what kind of glue do you use to laminate a bow?
Logged
smoky, Bassett NE

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: glue for lamination
« Reply #1 on: August 07, 2013, 02:02:10 pm »
The best glue for wood/wood is Urac185(or its new substitute) but TiteBondIII works well too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline smoky#1

  • Member
  • Posts: 98
  • Clayton Porter
Re: glue for lamination
« Reply #2 on: August 07, 2013, 02:03:12 pm »
thanks
Logged
smoky, Bassett NE

Offline Joec123able

  • Member
  • Posts: 1,769
Re: glue for lamination
« Reply #3 on: August 07, 2013, 02:58:53 pm »
I use tite bond 2 or 3 for all tip overlays I've never had a failure with it
Logged
I like osage

Offline bubby

  • Member
  • Posts: 11,054
Re: glue for lamination
« Reply #4 on: August 07, 2013, 03:07:51 pm »
smokey I use tite bond 3 for all my glueups, it has a longer work time than tb2 and if you get a bad glueup it will release with heat
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: glue for lamination
« Reply #5 on: August 07, 2013, 03:10:01 pm »
I haven't tried TB3 but i have never had a failure glueing overlays with tb2 on red oak.
Logged
"Insanity is doing the same thing over and over again and expecting different results"
Pages: [1]
« previous next »