« previous next »
Pages: [1]

Author Topic: superglue question  (Read 1041 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
superglue question
« on: August 07, 2013, 12:13:45 am »
i have a piece of wood that i am working on and it had cracks so i put some super glue on them...come i find out i have to do some steaming in the same area...SO,does any one know what will happen to the glue if steamed...thanks..
Logged

Offline dbb

  • Member
  • Posts: 745
Re: superglue question
« Reply #1 on: August 07, 2013, 07:03:17 am »
The steam do nothing to CA glue.
If you need to bend it a lot where its glued it might crack a bit tho.
Still not a big problem.
Logged
It's better to ask and look like a fool than not to ask and remain one...

Don Case

  • Guest
Re: superglue question
« Reply #2 on: August 07, 2013, 01:22:34 pm »
I'm new to this but I've built R/C sailboats for years and I use super glue to seal/waterproof exposed wood. It works great. Because of this I would suspect that it would stop the steam from penetrating that area. That said, I have read that it's more the heat than the steam that allows you to bend the wood. Just my $.01 worth.
Don
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: superglue question
« Reply #3 on: August 07, 2013, 01:25:10 pm »
Steam is fine John, dry heat it and it will burn your eyes out and poison you.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1]
« previous next »