« previous next »
Pages: [1]

Author Topic: Hickory backed red oak board bow  (Read 1644 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Hickory backed red oak board bow
« on: August 05, 2013, 02:55:07 pm »
So I went a bought a 6' red oak board. Nice straight grain with a slight swirl in the center. That will be my handle. How think should the hickory be? I plan on gluing them together then ripping the excess hickory on my table saw. It's 1.5" wide and 3/4" thick. Any one with any dimensions for a 60" bow
Logged
Nothing ventured nothing gained

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Hickory backed red oak board bow
« Reply #1 on: August 05, 2013, 03:02:16 pm »
1/8" back, 5/8" core at glue up. 1.5" wide is a narrow unless your only planning to pull it 23-25".
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Hickory backed red oak board bow
« Reply #2 on: August 05, 2013, 03:03:51 pm »
what draw length and weight are you aiming for?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Hickory backed red oak board bow
« Reply #3 on: August 05, 2013, 03:09:22 pm »
If you have to go 1 1/2" keep the bow long.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Hickory backed red oak board bow
« Reply #4 on: August 05, 2013, 03:55:40 pm »
Well maybe ill just have to use this one for handles and ill grab a new board. I have English walnut. Would that make a bow if backed with hickory
Logged
Nothing ventured nothing gained
Pages: [1]
« previous next »