Spliced Yew/Hickory backed bow, quick opinion help...

[Dag]

What do you think of this?  I think I've looked at it too many times today. I need some fresh eyes and opinions    The bow is 63" long and I am shootin' for a #35-45@26. 

The yew billets seemed to be of two different densities which has made this bow a challenge from the get-go.

The upper limb is on the side of the frame with the bbq.

[Newindian]

Looks pretty dang good, maybe a tiny bit more bend toward the tips, time for a short string

[Ifrit617]

a little to much bend mid-limb on left limb in pic, it needs to work a tad more towards the tip. Make that your top limb. Get the fade and tip working a bit more on the right limb and a few extra scraps to make it more even to the left. Then your in business.

Jon

[steve b.]

Its good, assuming your foot is in the right place.

[adb]

I'd get the fade in the right limb working more.

[IdahoMatt]

a little to much bend mid-limb on left limb in pic, it needs to work a tad more towards the tip. Make that your top limb. Get the fade and tip working a bit more on the right limb and a few extra scraps to make it more even to the left. Then your in business.

Jon

+1

[Hrothgar]

adb x 2 --A little more bend coming off the right limb.

[Dag]

Thank you very much for the feedback everyone!  I went ahead and did as you guys said, more bending in fade of the right limb and tips bending slightly more.

I'll post a new pic or vid soon.

The original picture was a snapshot of this video...
http://www.youtube.com/watch?v=tjR7a6-TARw