« previous next »
Pages: [1] 2

Author Topic: Mandraulic Bandsaw!  (Read 4304 times)

0 Members and 1 Guest are viewing this topic.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Mandraulic Bandsaw!
« on: July 25, 2013, 04:04:50 pm »
Thought you guys would like to see this which I came across at an open air Museum.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline JonW

  • Member
  • Posts: 1,906
Re: Mandraulic Bandsaw!
« Reply #1 on: July 25, 2013, 04:12:47 pm »
Good luck trying to get the wife to run it for you!!
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Mandraulic Bandsaw!
« Reply #2 on: July 25, 2013, 04:35:42 pm »
I bet an one time that was a REAL treasure to somebody!
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Mandraulic Bandsaw!
« Reply #3 on: July 25, 2013, 05:03:50 pm »
Absolutely insane. Didn't know there was such a thing.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Mandraulic Bandsaw!
« Reply #4 on: July 25, 2013, 05:07:15 pm »
Great!! First one I've ever seen.  8) No wife here so I'd have to have pedals. :laugh:
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

mikekeswick

  • Guest
Re: Mandraulic Bandsaw!
« Reply #5 on: July 25, 2013, 06:13:40 pm »
I would love that!
Easy enough to motorise it and it was obviously made when tools were tools.
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Mandraulic Bandsaw!
« Reply #6 on: July 25, 2013, 06:30:47 pm »
That one can do something the new ones don't, ...bandsawing by candle light!

OneBow
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Mandraulic Bandsaw!
« Reply #7 on: July 25, 2013, 08:24:45 pm »
Quote from: Onebowonder on July 25, 2013, 06:30:47 pm
That one can do something the new ones don't, ...bandsawing by candle light!

OneBow

Haha, true! Man, I would hate to be the guy doing the cranking on it while some guy was trying to resaw a 10" piece of rosewood or something... That's insane.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline tallpine

  • Member
  • Posts: 183
  • East Texas
Re: Mandraulic Bandsaw!
« Reply #8 on: July 25, 2013, 08:47:51 pm »
I would bet that monster cuts pretty good when you get those big heavy cast iron wheel spinning it would have quite a bit of torque. You can tell by the blade guide that it will accommodate a pretty large timber. This was made back in the days when craftsman had apprentices and I bet it wore out a bunch of them. 
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Mandraulic Bandsaw!
« Reply #9 on: July 25, 2013, 11:04:40 pm »
I love the spoke design on the front two wheels.  That would be fun to use.
Logged
I started out with nothin' and I still got most of it left

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Mandraulic Bandsaw!
« Reply #10 on: July 25, 2013, 11:56:42 pm »
Del, where  was this?

Jim Davis
Logged
Jim Davis

Kentucky--formerly Maine

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Mandraulic Bandsaw!
« Reply #11 on: July 26, 2013, 02:54:47 am »
Quote from: asharrow on July 25, 2013, 11:56:42 pm
Del, where  was this?

Jim Davis
It's at the Weald and Downland Museum in the UK
http://www.wealddown.co.uk/
I was there doing some Tudor re-enactment... trying to do 2 days work in two hours tillering a longbow whilst not wearing my glasses >:(
What could possibly go wrong?
Actually it was great fun and we had a great crew ;D
De
« Last Edit: July 26, 2013, 05:23:41 am by Del the cat »
Logged
Health warning, these posts may contain traces of nut.

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Mandraulic Bandsaw!
« Reply #12 on: July 26, 2013, 05:13:25 am »
  that is awwwsome

          chuck
Logged
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Mandraulic Bandsaw!
« Reply #13 on: July 26, 2013, 06:58:18 am »
Got to love that,I need one of them in my shop right beside my hand powered drill press. Very cool. :)
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Mandraulic Bandsaw!
« Reply #14 on: July 26, 2013, 09:00:11 am »
That thang would sure come in handy if we ever have one of them e m p's!! ;)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA
Pages: [1] 2
« previous next »