Author Topic: cracks on the side  (Read 2368 times)

0 Members and 1 Guest are viewing this topic.

Offline BOWMAN53

  • Member
  • Posts: 2,238
cracks on the side
« on: July 24, 2013, 03:23:55 pm »
Im working on a hickory board bow and i started getting cracks on the side  of the limbs, length wise. I filled it with super glue but is this bow going to die? Its shooting really nice, i finished the tiller last night, i just need to shoot it in.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: cracks on the side
« Reply #1 on: July 24, 2013, 03:26:54 pm »
Cracks in boards are never good Jordan. Pull it on your tree 50 - 60 times.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: cracks on the side
« Reply #2 on: July 24, 2013, 03:37:37 pm »
Will do.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: cracks on the side
« Reply #3 on: July 24, 2013, 03:56:17 pm »
methinks that that bow may explode. Maybe a shear fracture? If the board is edge-ringed... that might be a earlywood ring failing?

this happened with a red oak board.. but some superglue solved it, so i never did figure out what.
"Insanity is doing the same thing over and over again and expecting different results"

Offline bubby

  • Member
  • Posts: 11,054
Re: cracks on the side
« Reply #4 on: July 24, 2013, 03:58:07 pm »
yeah longitudinal cracks on the edge grain are scary , I worry about it de lamming
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: cracks on the side
« Reply #5 on: July 24, 2013, 04:17:25 pm »
its quatersawn if that makes a difference

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: cracks on the side
« Reply #6 on: July 24, 2013, 04:26:01 pm »
Worse yet.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: cracks on the side
« Reply #7 on: July 24, 2013, 04:29:33 pm »
this one was gonna be cool too :( ill finish it anyways, and it if breaks then it breaks.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: cracks on the side
« Reply #8 on: July 24, 2013, 04:34:17 pm »
Wrap that area with sinew or silk thread and saturate it with glue. You may still get 500-1000 shots from it, or you may not. If its 1/4 sawn and the crack is on the side that means its through the growth ring and not just a laminar separation.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: cracks on the side
« Reply #9 on: July 24, 2013, 05:48:55 pm »
never had that happen with quartersawn, do like pearlie said and shoot the piss out of it
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: cracks on the side
« Reply #10 on: July 24, 2013, 06:57:10 pm »
never had that happen with quartersawn, do like pearlie said and shoot the piss out of it

yeah i didnt think a quartersawn board could crack like that.

Offline bushboy

  • Member
  • Posts: 2,256
Re: cracks on the side
« Reply #11 on: July 24, 2013, 08:51:45 pm »
Usually happens when the back edges aren't rounded enough'but this may not be the case.another option would be narrow the bow enough to get rid of the crack ,back it with something like maple and glue in some reflex to get back some weight.
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

mikekeswick

  • Guest
Re: cracks on the side
« Reply #12 on: July 25, 2013, 03:49:24 am »
Quartersawn / flat sawn /bias...whatever.......wood will split along the fibers. The wood doesn't know how it's been cut  ;) Go and split some firewood to prove it to yourself. Wood is made up of strong fibers stuck together with weak glue from whichever angle you look at it.
How was the moisture content? How much set has the bow got?

Offline adb

  • Member
  • Posts: 5,339
Re: cracks on the side
« Reply #13 on: July 25, 2013, 11:13:04 am »
Consider the bow broken. Sooner than later, it will completely fail. Learn from it, and make another!