« previous next »
Pages: [1]

Author Topic: tip overlay how to?  (Read 2288 times)

0 Members and 2 Guests are viewing this topic.

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
tip overlay how to?
« on: July 17, 2013, 12:37:52 pm »
 If i recall i thought Keenan did a how to on how he does his tip overlays. I couldn't find it, can anyone help? Or is there a similar how to? thanks, Dan
Logged
45# at 27"

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: tip overlay how to?
« Reply #1 on: July 17, 2013, 12:43:31 pm »
Go tot the Build along section and search "overlays". You will get all the reading you want.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: tip overlay how to?
« Reply #2 on: July 17, 2013, 01:34:09 pm »
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline Eric Krewson

  • Member
  • Posts: 5,395
Re: tip overlay how to?
« Reply #3 on: July 17, 2013, 06:02:19 pm »
I have been adding an extra groove to my overlays for a simple bow stringer. I widen the lower string groove on the lower limb so the stringer loop can fit over the bow string in the groove.

Logged

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: tip overlay how to?
« Reply #4 on: July 17, 2013, 06:21:40 pm »
Quote from: Eric Krewson on July 17, 2013, 06:02:19 pm
I have been adding an extra groove to my overlays for a simple bow stringer. I widen the lower string groove on the lower limb so the stringer loop can fit over the bow string in the groove.
My horn-tipped longbow I got from TMK has this.
I have considered it multiple times on other bows... and decided it wasn't worth it- they are not overlays, but close, so all I had to do was just slip it into the wrapped nock... ill take a pic and let it explain.
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: tip overlay how to?
« Reply #5 on: July 17, 2013, 06:37:56 pm »
Looks like Mesquite on the overlays Eric????  Curious as I have a set planned for a bow I'm working on now.  Wondering how it looks works etc...  Good lookin' either way.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Eric Krewson

  • Member
  • Posts: 5,395
Re: tip overlay how to?
« Reply #6 on: July 17, 2013, 08:24:56 pm »
My overlays are actually highly figured osage.
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: tip overlay how to?
« Reply #7 on: July 17, 2013, 09:11:54 pm »
Eric,
I like the double string nocks. Do you do it on the top bottom or both limbs?  I am thinking on doing it on top limb on the next bow.  I can see a boot and loop stringer working very well and not stressing the bow.
Thanks
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: tip overlay how to?
« Reply #8 on: July 17, 2013, 09:19:38 pm »
Very nice Sir.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: tip overlay how to?
« Reply #9 on: July 17, 2013, 09:30:59 pm »
Sorry Eric , I just got finished reading you COMPLETE post  My Bad
DBar
Logged
Integrity is doing the right thing when no one is looking
Pages: [1]
« previous next »