« previous next »
Pages: [1]

Author Topic: Finish/Paints?  (Read 2494 times)

0 Members and 1 Guest are viewing this topic.

Offline ncpat

  • Member
  • Posts: 98
Finish/Paints?
« on: July 15, 2013, 12:48:43 pm »
I think I have seen this topic before but cannot locate at the moment.

I have a little Minwax from a project. Would it be OK as an arrow finish? How about spray paint? I have blue & white spray paint, semigloss finish. I have flat black & brown spray paint also.

What do you guys use?
Logged
Remember the heroes of Flight 93.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Finish/Paints?
« Reply #1 on: July 15, 2013, 01:18:30 pm »
Quote from: ncpat on July 15, 2013, 12:48:43 pm
I think I have seen this topic before but cannot locate at the moment.

I have a little Minwax from a project. Would it be OK as an arrow finish? How about spray paint? I have blue & white spray paint, semigloss finish. I have flat black & brown spray paint also.

What do you guys use?
I tried spray paint on cane but it flakes off.
Go for the minwax, it works fine on oak shafts ;)
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Finish/Paints?
« Reply #2 on: July 15, 2013, 09:14:04 pm »
I've used both with good results on POC shafts.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BigNocker

  • Member
  • Posts: 15
Re: Finish/Paints?
« Reply #3 on: July 17, 2013, 04:39:36 pm »
I've got a book called, North American Bows, Arrows, and Quivers.  It has many detailed drawings of arrows from the Smithsonian etc. Its fun to paint arrows to match the historic ones with different ochre pigments.
Logged
"Hail to the king baby!" "Balls of steel"
Pages: [1]
« previous next »