« previous next »
Pages: [1]

Author Topic: TB 2 or 3 w/ sinew?  (Read 3953 times)

0 Members and 1 Guest are viewing this topic.

Offline BigWapiti

  • Member
  • Posts: 273
TB 2 or 3 w/ sinew?
« on: November 22, 2007, 12:53:25 pm »
Since there's not really any tension on a sinew wrapped arrow, does it work to use TB II or III for glueing down fletch and nock sinew ?  Or do I need hide glue?  thx, -Mike
Logged
Mike B.
Central Washington State
"Take a kid hunting, it'll make a WORLD of difference" -me

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: TB 2 or 3 w/ sinew?
« Reply #1 on: November 22, 2007, 01:26:26 pm »
 I use TB3.I soak my sinew in a warm bowl of water.I squeeze some TB3 on two fingers and pull the sinew between them, wrap the arrow. After it dries,then I coat it again and seal with poly.If you want it to look authenic seal it with pitch.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline BigWapiti

  • Member
  • Posts: 273
Re: TB 2 or 3 w/ sinew?
« Reply #2 on: November 22, 2007, 04:44:08 pm »
Great!  Thanks!
Logged
Mike B.
Central Washington State
"Take a kid hunting, it'll make a WORLD of difference" -me

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: TB 2 or 3 w/ sinew?
« Reply #3 on: November 23, 2007, 06:24:02 pm »
I chew sinew to be wrapped. It makes it's own glue by doing so. After it dries, I add TBIII or super glue top seal.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »