38 shells

[RBLusthaus]

Hi guys

I am not a gun guy, so please excuse my inappropriate verbiage, if I mess it up. 

I am wanting to make some blunt arrows using 38 shells (or is it casings) as the blundt point.  I would add lead to the shell to bring them up the weight I want, and then mount them on 11/32 shafts.

So, I am looking to trade for some 38 shells (2 dozen, maybe) or any other size that will be a good fit on 11/32 shaft.  Looks count, if different size shells would look better than others.  Please advise.  Of course, let me know what you would like in exchange  -  I have an assortment of stuff and am sure we could work something out. 

Russ

In my mind it was clear as mud, but I guess I should say this also - - I am not looking to remove the slug and powder from a new 38 shell, I just want the empty shells.   Thanx.

[bowtarist]

  357 and 357 Mag. casings work good too.  If you have any cane or can drill a hole in the shaft, putting/glueing a duplex nail with the first head ground to a point in first then glue the casing over it gives it some weight and a bit more damage.  That's what I use in the yard a lot, Mags and a duplex. Some are brass and some are nickle. Good luck, dpg

[sonny]

I have some.
send me a pm and we'll work something out.

[Youngboyer2(billyf)]

Russ if the trade doesn't work out I'm sure I could grab some, my dad is getting his pistol permit so we should be spending some time at the range

[KHalverson]

iv'e got some 357 mag brass if ya need em
Kevin

[RBLusthaus]

Thanks guys.  I got what I needed.  I will keep you guys in mind for the next batch. 

Russ

[adb]

Try heading out to your local outdoor range. There's usually shit loads on the ground for free at our range.